Haier LE392D2320 Service Manual page 14

TV
1. Signal Type : Use the [CH-] or [CH+] buttons to highlight one of the following options, then press [ENTER] to
enter the sub-menu and press[VOL-] or [VOL+] to adjust.
[Antenna] – Set the signal type to antenna. When set to Air, the TV can receive analog and digital (ATSC)
broadcasting signal.
[Cable] – Set the signal type to cable. When set to Cable, the TV can receive analog and QAM broadcasting signal.
2. Auto Channel Search: Highlight and press ENTER to start the channel scan.
3. Channel Skip: Manually add and skip channels in your program list.
4. Favorite List: Manually add and skip channels in your favorite list.
SETUP
1. Menu Language : Use the [CH-] or [CH+] buttons to highlight one of the following options, then press [ENTER]
to enter the sub-menu and press[VOL-] or [VOL+] to adjust.
Set the On-Screen-Display language.English/Espanol/Francais.
2. Aspect Ratio: Press to switch the display mode: Normal, Wide, Cinema, Zoom when having signal.
3. MTS: Set the preferred sound track of analog channels. Mono/Stereo/SAP.
4. No Signal Power Off: When this option is set to On, the TV will automatically turn off when there is no input
signal.
5. Blue Screen: When this option is set to On, the screen will be blue instead of black when there is no input
signal.
6. Audio Only: Press [ENTER] to turn down backlight ,and press any key to resume.
7. Time Setup: Set Time Zone/Time/Sleep Timer/Auto Sleep.
8. Caption: Set Caption Display/Analog Closed Caption/Digital Closed Caption /Digital Caption Style. For details,
please refer to page 22.
9. All Reset: Reset all the Settings to default.
14