1. Manuals
  2. Brands
  3. Tiandy Manuals
  4. Security Camera
  5. 1.3MP Mini Bullet
  6. User manual

Tiandy 1.3MP Mini Bullet User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Network Camera
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1.3MP Mini Bullet and is the answer not in the manual?

Questions and answers

Related Manuals for Tiandy 1.3MP Mini Bullet

Summary of Contents for Tiandy 1.3MP Mini Bullet

  • Page 1 Network Camera User Manual...

  • Page 2: Table Of Contents

    CONTENT Chapter 1 Warning ..................3 Chapter 2 Product Overview ................ 5 Chapter 3 Specifications ................10 3.1 Specifications ................10 3.2 Hardware Interface ..............19 3.3 Common Functions ..............24 Chapter 4 Installation Instruction ............... 26 4.1 Installation Preparation .............. 26 4.2 Installation Instruction ..............

  • Page 3: Chapter 1 Warning

    Chapter 1 Warning TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
  • Page 4 The BNC Out terminal of the product is provided for easier installation, and is not recommended for monitoring purposes. If you keep the BNC cable connected, a risk of lightening may cause damage or malfunction to the product. Please use the input power with just one camera and other devices must notbe connected.

  • Page 5: Chapter 2 Product Overview

    Chapter 2 Product Overview Default IP address: http://192.168.1.2 Default user name: admin Default password: 1111 IP IR Bullet Camera Pic 2.1 Size of IP IR bullet camera...
  • Page 6 IP Mini Bullet Camera Pic 2.2 Size of IP Mini bullet camera...
  • Page 7 IP IR Dome Camera Unit:mm Pic2.3 Size of IP IR dome camera IP Mini Dome Camera Pic 2.4 Size of IP Mini dome camera...
  • Page 8 IP Vandal-proof IR Dome Camera Pic 2.5 Size of IP vandal-proof IR dome camera IP Box Camera Pic 2.6 Box camera dimension IP Varifocal Bullet Camera Pic 2.6 Varifocal Bullet camera dimension...
  • Page 9 IP Varifocal Dome Camera Pic 2.7 Varifocal Dome camera dimension...

  • Page 10: Chapter 3 Specifications

    Chapter 3 Specifications 3.1 Specifications 3.1.1 1.3M&2M Mini Camera Specifications 1.3MP Item 1.3MP Mini Bullet 2.0MP Mini Bullet 2.0MP Mini Dome Mini Dome Processor Processor Video Codec H.264 HP/MP/BP, M-JPEG Audio Codec G.711/G.726/ADPCM/ACC_LC Sensor 1/3 Inch CMOS 1/2.8 Inch CMOS...
  • Page 11 3.1.2 1.3M&2M Vandal-proof Dome Camera Specifications Item 1.3MP Vandal-proof Dome 2.0MP Vandal-proof Dome Processor ARM9 Linux Video Codec H.264 HP/MP/BP, M-JPEG Audio Codec G.711/G.726/ADPCM/ACC_LC Sensor 1/3 Inch CMOS 1/2.8 Inch CMOS Resolution 1280*960 1920*1080 PAL:960P@25fps;NTSC: PAL:1080P@25fps;NTSC: Frame 960P@25fps 1080P@25fps 100dB Video Process NIR Enhancement/HLC/3D NR/BLC/Gamma/Margin Enhancement Manual/Auto,1/100k～1s adjustable...
  • Page 12 Video Process NIR Enhancement/HLC/3D NR/BLC/Gamma/Margin Enhancement Manual/Auto,1/100k～1s adjustable E-shutter Day/Night Dual ICR Video:32K～16M bps, Audio: 8k,32k,48k Code Range Interface POE/Audio-in 25m～30m IR Distance Network 10M/100M Network TCP/UDP/HTTP/MULTICAST/UPnP/NTP/RTSP/Onvif Protocol IVA(Intelligent Tripwire/Perimeter Video Analytics) Protection IP66,4000V TVS and Anti-surge -35℃～65℃ Temperature Consumption Weight 0.5Kg Power Supply...
  • Page 13 Consumption 8.5W(IR On),7W(IR Off) Weight Power Supply DC12V(±10%)/PoE 3.1.5 3M Camera Specifications Item 3MP Box Camera 3MP VF Dome Camera 3MP VF Bullet Camera Processor Cortex A7 Embedded Linux OS Video Codec H.265/H264/M-JPEG Audio Codec G.711/G.726/ADPCM/AAC Sensor 1/2.8” SONY Exmor CMOS Resolution 2048x1536 Pal 2048x1536@25fps/1920x1080@50fps...
  • Page 14 Indoor IP 66 IP 67 -35℃～65℃(IR ON) -35℃～65℃(IR ON) /Working -35℃～40℃ Temperature -35℃～40℃(IR OFF) -35℃～40℃(IR OFF) Power 5.0W Consumption Weight 0.5Kg Power Supply PoE/DC12V(±10%)/AC24V(±25%) 3.1.6 4M Camera Specifications Item 4MP Mini Bullet Camera 4MP Vandal-proof Dome Camera Processor ARM9 Linux Video Codec H.265,H.264 HP/MP/BP, M-JPEG Audio Codec...
  • Page 15 3.1.7 5M Camera Specifications Item 5MP Box Camera 5MP VF Dome Camera 5MP VF Bullet Camera Processor Cortex A7 Embedded Linux OS Video Codec H.265/H264/M-JPEG Audio Codec G.711/G.726/ADPCM/AAC Sensor 1/2.8” SONY Exmor CMOS Resolution 2592×1952 Pal 2048x1536@25fps/1920x1080@50fps Frame NTSC 2048x1536@30fps/1920x1080@60fps 120dB DNR/NIR Enhancement/HLC/BLC/De-interlace/Margin...
  • Page 16 Consumption Weight 0.5Kg Power Supply PoE/DC12V(±10%)/AC24V(±25%) 3.1.8 1.3M Starlight Camera Specifications 1.3MP Starlight 1.3MP Starlight Item 1.3MP Starlight Dome Camera Box Camera Mini Bullet Camera Standard Vandal-proof Mini Processor ARM9 Architecture Embedded Linux OS Video Codec H264/M-JPEG Audio Codec G.711/G.726 /ADPCM Sensor 1/3"...
  • Page 17 IR Range 30-50m/80m- 20-30m 20-30m 15-20m 15-25m 4mm/6mm/8m 2.8mm/4m 2.8mm/4m 2.8mm/4m Lens options 4mm/6mm m/12mm m/6mm m/6mm Ethernet 1-ch RJ45 10M / 100M Ethernet Interface Network TCP/IP/ICMP/HTTP/HTTPS/FTP/DHCP/DNS/DDNS/RTP/RTSP/RTCP/PP Protocol PoE/NTP/UPnP/SMTP/SNMP/IGMP/802.1X/QoS/IPv6/Bonjour 6000V 6000V 6000V 6000V 6000V Protection Protection, Protection, Protection, Protection, Protection, IP66 IP67 IP66 IP66, IK10...
  • Page 18 Day/Nigh Dual ICR Code Video rate,32K～16M bps. Audio rate,8k～48k Rate Audio-in 1-ch 1-ch Audio-out 1-ch Alarm-in 1-ch Relay-out MicroSD IR Range 30-50m 30-50m 20-30m 15-25m 20-30m 15-20m Lens 4/6/8/12 2.8/4/6 4/6/8/12 2.8/4/6 2.8/4/6 2.8/4 16mm 4/6mm Interface Ethernet 10M/100M/1000M Network ONVIF/TCP/IP/ICMP/HTTP/HTTPS/FTP/DHCP/DNS/DDNS/RTP/RTSP/RTCP/ Protocol PPPoE/NTP/UPnP/SMTP/SNMP/IGMP/802.1X/QoS/IPv6/Bonjour...

  • Page 19: Hardware Interface

    3.2 Hardware Interface Pic 3.2.1 Type-I interface Type Function Name Description Power DC12V DC12V±10% Common ETHERNE Ethernet 10M/100M,RJ45 Line-in, GND is common por, Audio Input A_IN and voltage input ≤1V; Pic 3.2.2 Type-II interface...
  • Page 20 Type Function Name Description Power DC12V DC12V±10% Common Ethernet ETHERNET 10M/100M,RJ45 Line-in, GND is common port, A_IN and voltage input ≤ 1V; Audio Line-in, GND is common port, AUDIO_OUT Using with active speaker (optional) Extensio ALARM_IN Discrete input, GND is common port (optional) Alarm ALARM_OUT Discrete output, GND is common port (optional)
  • Page 21 Pic 3.2.5 Varifocal Dome Camera Interface ① Power:DC12V 和 AC24V ② GND ③ Alarm ④ USB Port(GND/D+/D-/5V) ⑤ Network Interface RJ45 ⑥ Onekey Focus Button for motorized model ⑦ Reset Button ⑧ Mic ⑨ Debug Port ⑩ BNC Output ⑪ MicroSD Card Slot Note: Only available for embedded interface models Pic 3.2.6 Waterproof Cap Note: waterproof cap has 4 holes, each hole support cable with...
  • Page 22 LENS Control DC/P-Iris Lens VIDEO OUT Audio& 75Ωp-p analog signal /CVBS Video AUDIO IN Mic in/Line in Port AUDIO OUT Audio Output G is common port; 1&2 are alarm input ports,3 is ALARM IN alarm switch port, connect/disconnect to G to control Alarm camera Day/Night switch.
  • Page 23 ⑨ RS485 Port ⑩ GND ⑪ MicroSD card slot ⑫ 3.2.3.2 II-type Box Camera Pic 3.2.8 II-type box camera ① Power Port, DC12V ② Power Indicator ③ RS485 ④ Audio Port ⑤ Alarm Port, IN is alarm input, 1A and 1B are alarm output ⑥...

  • Page 24: Common Functions

    switch port, connect/disconnect to G to control camera Day/Night switch. ALARM OUT 1A/1B,signal relay output port Storage Micro SD Support up to 64G (operate after power off) RS485A/B 485 communication Extensi RS232:RX/T RX-receive port/TX-transmit port/G-GND The product is designed as a waterproof camera. It need to do the following steps to make it waterproof.
  • Page 25 How to upgrade the firmware Steps Description Ensure PC and Camera in the same network segment. Enter IP address and login WEB page of camera. Find the official firmware, and select kernel firmware (*.bin) to start upgrading. Notice: Kernel firmware need to be updated TWICE. Select WEB firmware (*.box) to update WEB page.

  • Page 26: Chapter 4 Installation Instruction

    Chapter 4 Installation Instruction 4.1 Installation Preparation 1. Preparation All electrical work must comply with the latest electrical codes, fire regulations and relevant laws and regulations;According to the packing list check if all accessories are in the package and determine the location of the high speed dome camera and installation applications are consistent with the requirements;...

  • Page 27: Installation Instruction

    4.2 Installation Instruction 4.2.1 IP IR Bullet Camera Pic 4.2.1 IP IR bullet camera installation Steps 1. Mark the installation holes in the wall by market pen. 2. Drill holes in marked points. 3. Plug the expansion bolts into the holes. 4.
  • Page 28 Steps 1. Mark the installation holes in the wall by market pen. 2. Drill holes in marked points. 3. Plug the expansion bolts into the holes. 4. Screw the bracket fastened to the wall. 5. Fix two nut screws aligned camera position and rotate tight. Adjust bracket gimbals to appropriate location.
  • Page 29 4.2.2 3IP Mini Bullet Camera Pic 4.2.2 IP Mini bullet camera installation Note: Adjust the sun-shield position after fix angle to avoid cover IR light or vision. Steps 1. Mark the installation holes in the wall by market pen. 2. Drill holes in marked points. 3.
  • Page 30 Pic 4.2.3 IP IR dome camera installation Steps 1. Take the camera out of box, and loosen 3pcs screws on the case, and then take down the base (see the Pic 4.2.3) 2. Mark the installation holes in the wall by market pen. 3.
  • Page 31 Pic 4.2.4 IP Mini dome camera installation...
  • Page 32 Steps 1. Drill holes according to the hole position chart and plug the expansion bolts into the holes. 2. Take the camera out of box and take down the cover, and then fix the dome onto the ceiling. 3. Loosen the regulating screws to adjust camera lens to a right direction and tighten the screws again.
  • Page 33 4.2.6 IP Box Camera Pic 4.2.6 IP Box Camera Installation Steps: 1.Mark holes position on the wall; 2.Drill the holes on the wall; 3.Put expansion rubber plug into the holes; 4.Install the bracket with screws onto the wall; 5.Fix the camera onto bracket with two screws, adjust to right direction and angle then tighten up the screws.
  • Page 34 Pic 4.2.7 Network Varifocal Bullet Camera Installation Steps: 1.Paste the position tag onto the wall; 2.Drill the holes on the wall as per the marks on the tag; 3.Put expansion rubber plug into the holes; 4.Fix the bracket onto the wall with screws; 5.Adjust angle then tighten up the adjust screw on bracket;...

  • Page 35: Chapter 5 Web Instruction

    Steps: 1.Paste the position tag onto the wall; 2.Drill the holes on the wall as per the marks on the tag; 3.Put expansion rubber plug into the holes; 4.Fix the bracket onto the wall with screws; 5.Adjust the lens to the right direction and angle, then close the dome cover and tighten it up.
  • Page 36 Pic 5.2.1 Web plug-in (2) Download ActiveX and click 【Run】to install Pic 5.2.2 Web plug-in (3) During installation, please close web browser and click 【 next 】 to finish installation.
  • Page 37 Pic 5.2.3 Web plug-in Installation (4) After installation, login IP address and allow operating system loading plug-in. Pic 5.2.4 Windows XP allow loading Web plug-in Pic 5.2.5 Win7/Win8 allow loading Web plug-in (5) After success loading plug-in, it will display login interface and then input correct user name and password.

  • Page 38: Log In

    Pic 5.2.6 Loading Web plug-in Note: Please use IE browser of windows and make sure the version above 6.0. Do not use any other browser except Firefox, Google. 5.3 Log in (1)Enter IP address and enter login interface. (2)Enter IP address and password, click login. The default user name is admin, password is 1111.
  • Page 39 5.4.1 A/V Preview Pic 5.4.1 A/V Preview Interface Icon Function Description Stream Preview 1 stream and default display 1 stream video Stream Preview 2 stream Stream Preview 3 stream Fixed Video images maintain a fixed proportion according proportion to the resolution of the IPC when adjustment Display video Full screen display Local record...
  • Page 40 (2)【IPC】It is support intercom with one user at the same time. 5.4.2 Stream set Pic 5.4.2 Stream set interface Click stream set and open parameter set interface. By dragging the target bar to adjust brightness, contrast, saturation and color Click【Default】to resume the default settings. According to network situation it can choose preview mode from 【Low bandwidth】...
  • Page 41 5.4.3 PTZ control This function only support camera with RS-485. Pic 5.4.4 PTZ 【PTZ control】It shows eight button and control the direction, click will enable auto scan. 【speed】Adjust speed by manual, range from 0～100. 【zoom】Enable to zoom in or zoom out, including optical and digital zoom. 【focus】Focus on the object manually according to how far it is when the auto focus does not work precisely.

  • Page 42: Playback

    5.4.4 PTZ position Enter preset number and click to search the preset position and 【Set】 or 【Call】 Pic 5.4.5 Preset interface 【set】Set the preset, add preset position, support add multiple presets. 【call】Call the preset, make speed dome to preset position 5.5 Playback Pic 5.5.1 Playback...
  • Page 43 5.5.1 Search recording files (1)Select【Record】and【Picture】in【File Type】. (2)Select targeted file type in 【Rec Type】. (3)Double click date in the schedule to search files. (4)Select【remote】and check record from IPC otherwise check the local record. 5.5.2 Download recording files (1)Check targeted files to download. (2)Click to download recording files.
  • Page 44 (7)Click to cancel mute and click to mute. (8)Click to stop 5.5.4 Recording snapshot Click to capture the picture when play back the video. Default storage path is D:\NetVideoBrowser\ PlaybackPics. 5.5.5 Video clip Click to cut a clip of video when play back the video. Click once to start and click again to finish.

  • Page 45: Log Searching

    5.6 Log searching Click【Log】to enter the page. Pic 5.6.1 Log management interface (1)【Channel No.】Select which channel you want to search. (2)【Log type】Select which type of log you want to search. (3)【Start time】Select start date and time. (4)【End time】Select end date and time. (5)【Query】Make a list of log at the presetting time.

  • Page 46: Audio Video Set

    (8)Click 【Export all page】 to export all the pages query to your computer. It is saved in D:\NetVideoBrowser. 5.7 Audio video set 5.7.1 Stream set Pic 5.7.1.1 Stream Set-General Set...
  • Page 47 Pic 5.7.1.2 Stream Set –Advanced Set Parameter Description Stream Type Pure video, audio & video 4CIF,VGA,720P,960P,1080P. Different camera support multi Resolution resolution type. Bit Rate Range from 32-16384 Kbps PAL:1 5 10 15 20 25 Frame Rate NTSC: 1 5 10 15 20 25 30 N/P Mode PAL,NTSC Prefer Mode...
  • Page 48 Support electronic image stabilization, and default set is close. Key frame function, Enable or disable SVC function. Stream set-Export Click【Export】to do backup of the configuration file for all the parameter, save to D:\NetVideoBrowser\VideoParam.dat) Stream set - Import Click 【 Import 】 to import the backup file for parameter configuration D:\NetVideoBrowser\VideoParam.dat) 5.7.2 Audio Set...

  • Page 49: Camera Set

    5.7.3 Key Region PIC 5.7.3 Key region 【Key Region】 To have better image quality for some regions on the video, there are 4 regions settable for each video. 1.【Draw Region】 Use the mouse to draw the key region on the video. 2.
  • Page 50 Pic 5.8.1 HD Parameters 【Current Template】 choose template that need to be modified. 【Template Name】 input template name HD Parameter – Image adjustment Set image brightness, contrast, saturation, hue, sharpness. HD Parameter – Exposure Set 【Shutter speed】 setup max exposure time. Note: If exposure time too long, the moving object’s image will has slur, if exposure time too short, the image color will much black.
  • Page 51 HD Parameter – Export Click 【Export】 export current HD parameter template to certain place (default address D:\NetVideoBrowser\HDPara.dat ), this template can be used for other same model cameras. HD Parameter – Import Click 【Import】 import HD parameter setting file from default address(default address D:\NetVideoBrowser\ HDPara.dat), to achieve quick configuration.
  • Page 52 5.8.3 Day/Night Setting 【D/N Setup】 setup IP camera to switch in day and night with different rules Pic 5.8.3D/N Setup Color to gray: Self-adaption: In color mode, IPC will detect and analysis the brightnesss by internal synchronization sensor. When the brightness is lower than the setted night brightness ,the image will change into B/W.

  • Page 53: Vca (For 2Mp And 1.3Mp Camera)

    5.9 VCA (for 2MP and 1.3MP Camera) 【VCA】 intelligent analysis, process event alarm. 5.9.1 Create Rule (1)【Enable】 turn on or off current channel’s VCA function (2)【Rulename】 remark the rule (3)【Rule ID】 can setup 2 rules at same time. (4)【Event set】support【Virtual fence】 【intrusion detection】 【Virtual fence】:if object cross the line in setting area, will trigger alarm 【intrusion detection】:【Detection mode】...
  • Page 54 5.9.2 Alarm Setup Pic 5.9.2 VCA Schedule (1)Select 【Rule ID】,【Enable】,setup time in 【Schedule】 and 【Save】 (2)Setup 【Link type】, support four kinds of alarm linkage type 【Link out】,【Link record】,【Link snapshut】,【Link PTZ】. (3)【Save】 5.9.3 Alarm information Pic 5.9.3 Alarm information (1)Switch【Rule ID】check alarm information of current rule. (2)【Reset】:clear current channel events alarm, and beginfromone in next event...

  • Page 55: Vca

    happened. (3)【Clear】 clear all alarm information from current list. 5.10 VCA 【VCA】 intelligent analysis, process event alarm. 5.10.1 Alarm information 【Event】 check certain or all VCA events alarm information. 【Rule ID】 check certain or all rule’s alarm information 【Clear】 clear all alarm information from current list.
  • Page 56 5.10.2 Create Rule During the configuration, the VCA will be suspended. 【Enable】 turn on or off current channel’s VCA function 【Enable Arithmetic】 Behavior analysis and crowd analysis functions only can enable one in one time. Video and audio abnormal detection can work with upon analysis functions at same time.
  • Page 57 5.10.2.1【Arithmetic Configuration】【Behavior Analysis】 【Behavior Analysis】 include 8 kinds of functions : virtual fence, double tripwire, intrusion detection, items abandon, missing object detection, loiter, running, parking. Every function can be setup with different settings, but total rule number should less 8 rules. 【Save】save all the settings 【Next】go into 【Alarm Setup】, please refer to 5.9.3 5.10.2.2 【Arithmetic Configuration】...
  • Page 58 【Percentage】 setup target size in the total screen (area percent). Setup 【Two-way Alarm】 if needed 【Save】save all the settings 【Next】go into 【Alarm Setup】, please refer to 5.9.3 5.10.2.3 【 Arithmetic Configuration 】  【 Behavior Analysis 】  【 Double Tripwire】...
  • Page 59 5.10.2.4【Arithmetic Configuration】【Behavior Analysis】【Intrusion Detection】 Select rule number, 【Event Set】 intrusion detection, and check 【Valid】 Draw the detection area Select detection mode, 【in】 it will trigger alarm when object go in detection area; 【out】 it will trigger alarm when object go out detection area; 【Intrusion】 it will trigger alarm when object stay in detection area until reach 【Invasion Time】.
  • Page 60 5.10.2.5 【 Arithmetic Configuration 】  【 Behavior Analysis 】  【 Items Abandon】 Select rule number, 【Event Set】 items abandon, and check 【Valid】 Draw detection area, please notice the detection area shouldn’t overlap when 【Items Abandon】 and 【Missing Object Detection】 are enable at same time 【Percentage】...
  • Page 61 5.10.2.6 【Arithmetic Configuration】  【Behavior Analysis】  【Missing Object Detection】 Select rule number, 【Event Set】 missing object detection, and check 【Valid】 Draw detection area, please notice the detection area shouldn’t overlap when 【Items Abandon】 and 【Missing Object Detection】 are enable at same time 【Percentage】...
  • Page 62 5.10.2.7【Arithmetic Configuration】【Behavior Analysis】【Loiter】 Choose【Rule ID】【Loiter】【Valid】 Draw detection area on the image Setup alarm time, alarm when the object keep loitering to this alarm time Setup min area, alarm when the object’s motion area is equal to or greater than this min area.
  • Page 63 5.10.2.8【Arithmetic Configuration】 【Behavior Analysis】 【Running】 Choose 【Rule ID】【Running】【Vaild】 Draw detection area on the image Setup alarm time, alarm when the object keep running to this alarm time Setup min area, alarm when the object’s running area is equal to or greater than this min area.
  • Page 64 5.10.2.9【Arithmetic Configuration】【Behavior Analysis】【Parking】 Choose 【Rule ID】【Parking】【Vaild】 Draw detection area on the image Setup alarm time, alarm when the object keep parking to this alarm time Setup percentage, the percent of the object in the whole image Setup speed threshold, alarm when the object’s moving speed (percent/second) is slower than this speed threshold.
  • Page 65 5.10.2.13【Enable Arithmetic】【Crowd】 Draw the detection area Set the time of linking to alarm Set the crowd percentage 【Save】save all the settings 【Next】go into 【Alarm Setup】, please refer to 5.9.3 15.10.2.15【Enable Arithmetic】【Video Detection】 Enable lens or scene switch dignose Set sensitivity, and the higher value means more sensitive 【Save】save all the settings 【Next】go into 【Alarm Setup】, please refer to 5.9.3...
  • Page 66 5.10.2.16【Enable Arithmetic】【Audio Abnormal Det.】 Enable signal loss or abnormal detection Set sensitivity, and the higher value means more sensitive 【Save】save all the settings 【Next】go into 【Alarm Setup】, please refer to 5.9.3 5.10.3 VCA Schedule Select the 【Rule ID】, the 【Rule Name】and 【Event】will auto update 【Enable】to active the rule Set schedule date and time Set 【Link Type】: 【Link Out】,【Link Record】【Link Capture】【Link PTZ】...

  • Page 67: Osd

    【Save】all the settings 5.10.4 Advanced Note:【Advance】is only available for company engineer to setup 5.11 OSD 5.11.1 OSD This function is used to add more info on the preview screen Pic 5.10.1 OSD...
  • Page 68 OSD-Camera Title Enable【Channel Title】 and input channel name 【Color】:select OSD color 【Custom Location】: select position on video image by mouse OSD-Date Enable【Date】to overlay date, and there are 11 formats for option Enable 【Show Week】to overlay week information on image Select 【24 hours】or 【12 hours】 【Color】:select OSD color 【Custom Location】: select position on video image by mouse OSD-Additional Text...
  • Page 69 Note: Logo format should be 24bit .bmp and size should be less than 200*200, and height and width are divisible by 4 System will remove the black and white picture background automatically 5.11.3 Privacy Mask This function is used for setting hidden region on the preview screen to protect important info .It supports up to 4 regions Pic 5.10.3 Privacy Mask (1)【Stream】: select channel stream for privacy mask...

  • Page 70: Storage Management

    5.12 Storage Management 5.12.1 Record Policy Pic 5.11.1 Record Policy (1)【Record Status】: Show the device recording status (2)【Manual Rec.】:Enable to start recording and cancel to stop 【Alarm Rec.】: Enable to start recording when alarm is triggered 【Continuous】: Enable to start timing recording (3)【Schedule】: setup time period in 【Continuous】mode.
  • Page 71 5.12.2 Pre-Alarm Recording This function is used for pre-recording before alarm is triggered and extending recording time after alarm disappeared. Pic 5.11.2 Pre-Alarm Recording (1)【Pre-Alarm Recording】: enable to start (2)【Pre-record Time(5-15)s】: support5s, 10s and 15s 【Record Delay(10-60)】: support 10s, 15, 30s and 60s (3)【Save】: save all the setup...
  • Page 72 5.12.3 Storage Set Pic 5.11.3 Storage Set 【Free Disk Space(MB)】: set the free disk space that custom want to keep.it should be larger than 512M 【When HDD full】: when the free disk space reached the target size, system will run the following operation: 【Stop Record】: it will stop recording 【Overwrite】: it will loop delete the earliest record file...
  • Page 73 5.12.4 Snapshot Set Pic 5.11.4 Snapshot Set (1)【Timing Capture】: enable to start timing capture. (2)【Interval(s)】: set timing capture interval time (3) 【Capture Link】 : 【Link FTP】 capture picture will be uploaded to FTP server; 【Link Email】capture picture will be sent by email. (4)【Save】: save all the setup 5.12.5 Disk Management 【Disk Information】: display the disk status...
  • Page 74 【Initialize Disk】: the new hard disk must be initialized first 5.12.6 Net Storage Pic 5.11.6 Disk Management (1)【Disk No.】: select one disk to setup (2)【Status】: show the disk installation status.【UnMounted】, 【Unformatted】, 【Formated】, 【Mounted】and 【Using】 are optional (3)【Usage】: show the disk usage status.【Record】, 【Backup】, 【Redundant】 and 【Read Only】are optional (4)【IP Address】: set NFS server IP address (5)【Mapping Path】: set the disk mapping path...

  • Page 75: Network Management

    5.13 Network Management 5.13.1 TCP/IP Set 5.13.1 TCP/IP Set 【DHCP】 check to enable DHCP server will automatically allocate IP address for devices. 【IPv6】 Display IPV6 address and subnet mask. 【MTU】 Maximum Transmission Unit, range from 500~1500, default value is 1500. Click 【Save】 after setting. 【Ethernet Rate】...
  • Page 76 5.13.2 Registration Center Set 【Server Name 】 【IP address】 【Port】 【User Name】and 【Password】in 【Registration Center】 in the registration center . 5.13.2 Registration Center...
  • Page 77 5.13.3 Network Service 5.13.3.1 DDNS 【Enable】 DDNS, Modify 【Sever Domain】 【DDNS Domain】 【Port】 【User Name】 【Password】, then click 【Save】. 5.13.3.1 DDNS 5.13.3.2 FTP Enter 【Server URL】 【Port】 【Path】 【User Name】 【Password】, Click 【Save】. Make sure to insert the memory card.
  • Page 78 5.13.3.2 FTP 5.13.3.3 PPPoE 【Enable】 PPPoE function, enter【Username】 【Password】and save the setting. 5.13.3.3 PPPoE 5.13.3.4 NTP Enter【NTP Server】 【Port】 【Interval】 , click 【Save】.
  • Page 79 5.13.3.4 NTP 5.13.3.5 MUC Enter【IP Address】 and【Port】,click 【Save】to enable multicast.
  • Page 80 5.12.3.5 Others 5.13.3.5 Others HTTP Port Enter Http port, restart device, then modify successfully. HTTPS Port Enter Https port, restart device, then modify successfully. RTSP Port Enter RTSP port, restart device, then modify successfully. UPnP Check the UPNP box and restart the device to enable the UPnP function. Cancel UPNP box and restart the device to able the UPnP.

  • Page 81: User Management

    5.13.4 Blacklist Blacklist It used to block some IP address, select【Block the Following IPs】, input the block IP address, then click【Add】,【Save】.Max to add 16 blacklist IP address. Caution: Please don’t add your own IP address in blacklist, otherwise you will not be able to login.
  • Page 82 The authority includes “Brose”,” Browse+ Control”,” browse+ control+ set” and “Administrator ”. Browse: Can only watch the videos. Browse+ Control: Watch video and control PTZ. Browse+ Control+ set: Allow all operation except user management. Administrator: All operations available. 5.14.1 Add user Note:Only the administrator can add and modify users.

  • Page 83: Alarm Management

    5.14.3 Delete User Select targeted user in user list and click【Delete】 to delete 5.14.3 Delete User 5.15 Alarm Management 5.15.1 Alarm Input 5.15.1 Alarm Input Select 【Input port】 , check “Enable” box to valid the port alarm function, and Cancel...
  • Page 84 it to close the alarm detection function. 【Mode set】 include “closed circuit alarm” and “open circuit alarm”. 【 ON 】 is closed circuit alarm. It will alarm when disconnected circuit occurs short-circuit. 【OFF】is open circuit alarm. There was an alarm when the connected circuit disconnect.
  • Page 85 5. Click 【Save】 5.15.3 Video Occlusion Detection When the video is covered, system will alarm according to the sensitivity setting. 5.15.5 Video Occlusion Detection 1.【Enable】Click to open Video Occlusion Detection function. 2.【Sensitivity】 Smaller number means more sensitive. 3.【Schedule】. Video Occlusion Detection works only during this Schedule time 4.【Link Type】Set to achieve linking (such as link PTZ) after alarm is triggered.

  • Page 86: Ptz Management

    setting email address when alarm is triggered. 5.15.6 Email Alarm 【Email Alarm Enable】check to enable this function. 【SMTP Server】 Address format should be smtp.xx.com. XX Stand for email server such as: smtp.gmail.com. 【SMIP Port】 Default number is 25. 【Email Account】 and 【Email Password】 are for the sending email. 【Email Address】 is for the receiving email.

  • Page 87: Advance Set

    Pic 5.16 PTZ Management 5.17 Advance Set 5.17.1 File Location Pic 5.17.1 File Location 【Stream】Choose the stream for a certain channel. 【Display frame and bit rate information】Check to display frame rate and bit stream on video. 【Browse】Click to choose save path of record files, snapshot, clips and download files.
  • Page 88 【Good Playback】 set to achieve the balance between fluency and delay. 【Minimum delay 】 【Good real-time】 【Balance】and 【Good Fluency】 is optional. 【Protocol Type】 TCP, UDP or multicast. 5.17.2 System setting Pic 5.17.2 System setting 【System Information】Display information of CPU, Memory and FLASH. 【Version Information 】...
  • Page 89 5.17.3 System Maintenance System maintenance includes 【Equipment Control】and 【Version Upgrade】 Pic 5.17.3 System Maintenance Firmware Upgrade, upgrade new firmware. (firmware format: .box/.bin) Upgrade process normally needs a few minutes until indication for completion. Please strictly follow the instruction by technical specialist for firmware upgrade. 【Specification import and export】...
  • Page 90 Pic 5.17.4.1 Access Platform –PU Set 【SIP Set】...
  • Page 91 Pic 5.17.4.2 Access Platform –SIP Set 【Platform Enabled】 【Platform Enabled】Enable and disable Onvif. System will reboot automatically after setting. Pic 5.19.4.3 Access Platform –Platform Enabled Notes: Current platform must be disabled before changing into a new platform...

  • Page 92: Chapter 6 Simple Fault Maintenance

    Chapter 6 Simple Fault Maintenance 6.1 System Failure 6.1.1 Not able to recognize U-disk or SD card Possible Reason: Disk partition information has problem, which cause no recognition, need formatting for the disk; Loose connection, re-plug U-disk/SD card and reboot the camera; For portable disk, it may fail when there is not enough power, need to check the power supply method to make sure enough power supply or change to use independent power supply disk.
  • Page 93 6.2.3 Incorrect image after login Possible Reason: There is other device in the some network with same IP and Mac address. Troubleshooting steps: Disconnect the camera, try to ping the network to check whether there is return package. Use the IP searcher to check whether there are devices with same IP address, then disconnect the other devices to make sure the IP address of the camera is unique.

  • Page 94: Operation Failure

    6.3 Operation Failure 6.3.1 No correct connection of video on IE Troubleshooting steps: Make sure host IP address is in the same network segment with the camera. 【Attention】Make routing if in different network segment. Make sure to use IE at version 8.0 or higher; Make sure driver for graphic card and DirectX are installed properly, it is recommended to install the latest version driver;...

  • Page 95: Audio Failure

    Please lower down the resolution or image quality when need fluent video in narrow network bandwidth; Please check if it open VCA functions, please close VCA function, then try again Please contact us if it is not resolved. 6.5.2 Connection is correct but screen is black or video image is anamorphic Other issues: No OSD, or image is anamorphic but go normal after full screen.

  • Page 96: Alarm Failure

    6.7 Alarm Failure 6.7.1 No Alarm Output Make sure output wiring is correct; Power input: voltage—AC110V/DC24V, electricity—1A; Check the setting for input/output port in IE; Make sure the alarm device is working properly 6.8 Cant’s be save after setup the parameter 6.8.1 Suddenly loses power after setup the parameter Parameter is set to save properly after 1 minute, unless reset the camera automatically...

  • Page 97: Chapter 7 After-Sales Service

    Chapter 7 After-sales Service We provide 1 years warranty for all our IP cameras. We provide free repair service in the warranty period except the following circumstances: Not follow the User Manual and the incorrect operation cause cameras damage; Lightning, fire, and in case of irresistible natural disasters; Product damage caused by using poor design matching product from other manufacturers.

This manual is also suitable for:

1.3mpmini dome2.0mp mini bullet2.0mp mini dome

Table of Contents