Vehicle Detection - HIKVISION DS-7104HGHI-F1/N User Manual

Step 3 Select the VCA detection type to Face Detection.
Step 4 Click to enter the face detection settings interface. Configure the trigger channel,
arming schedule and linkage action for the face detection alarm. Please refer to step3 to
step5 of Chapter 8.1 Setting Motion Detection for detailed instructions.
Step 5 Click the Rule Settings button to set the face detection rules. You can drag the slider to set
the detection sensitivity.
Sensitivity: Range [1-5]. The higher the value is, the more easily the face can be detected.
Step 6 Click Apply to activate the settings.

10.2 Vehicle Detection

Purpose
Vehicle Detection is available for the road traffic monitoring. In Vehicle Detection, the passed
vehicle can be detected and the picture of its license plate can be captured. You can send alarm
signal to notify the surveillance center and upload the captured picture to FTP server.
Step 1 Enter the VCA settings interface.
Menu> Camera> VCA
Step 2 Select the camera to configure the VCA.
Digital Video Recorder User Manual
Figure 10-1 Face Detection
Figure 10-2 Set Face Detection Sensitivity
175