Flash Settings
The following settings are
available with the built-in fl ash.
Setting
Setting
A
Flash control
mode
B
Flash compen-
sation/output
Choose from the following options:
•
TTL: TTL mode. Adjust fl ash compensation (
and choose a fl ash mode (
•
M: The fl ash fi res at the selected output (
gardless of subject brightness or camera settings.
Output is expressed in fractions of full power,
from ⁄ to ⁄. The desired results may not be
achieved at low values if they exceed the limits
of the fl ash control system; take a test shot and
check the results.
•
C (COMMANDER): Choose if the fl ash is being
used to control remote synced fl ash units, for ex-
ample as part of a studio fl ash system.
•
OFF: The fl ash does not fi re.
Adjust fl ash level. The options available vary with
the fl ash control mode (
Flash Photography
MODE
Description
Description
C
).
A
).
Built-In Flash
ADJUST
END
B
)
B
) re-
109
5