Circuit Diagram - Makita DF010D Technical Information

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -3. Disassembling Change lever
Remove Change lever from Switch unit (large) as drawn in Fig. 12.
Fig. 12
Push Change lever towards
the Motor side.
Change lever
Motor side
Switch unit (large)
[3] -4. Disassembling Slide plate
Push Slide plate towards the hinge portion of Motor housing R until it stops.
Slide plate can be removed by pulling in the direction of the gray arrow. (Fig. 13)
Fig. 13
Motor housing R
Slide plate
hinge portion
C
ircuit diagram
Fig. D-1
Color index of lead wires' sheath
Black
Red
Lever off the hook of Change lever
from the groove of Switch unit (large)
with a slotted screwdriver.
Terminal
Controller
Tape
Change lever can now be removed
from Switch unit (large).
Switch unit
red marking
(large)
DC motor
Connector
LED
Connector
Switch unit
(microswitch / green color)
P 4/ 5
Tape