Table of Contents
Advertisement
● Air filter care and cleaning
● A A ir fi er a
The Air Filter prevents dust from accumulating on the optical elements inside the LCD Projection TV. Should the
Air Filter become clogged with dust particles, it will reduce the Cooling Fans' effectiveness and may result in
internal heat building up and effect on the life of the LCD Projection TV.
To clean the Air Filter, follow the cleaning procedures below:
1
Turn off the LCD Projection TV and disconnect the AC
power cord from the AC outlet.
2
Remove the Right front cover of the LCD Projection TV.
a. Hold right upper side of the cover and slightly pull
forward.
b. Hold both sides of the cover and remove it.
3
Push downward with a forefinger on the Air Filter Holder
and pull the Air Filter Holder off the LCD Projection TV.
4
Remove the Air Filter from the Air Filter Holder, and clean
the Air Filter with a brush or a vacuum cleaner.
If the Air Filter is clogged extremely or broken, replace it
with the new one.
5
Fit the Air Filter back in the Air Filter Holder and then
repl
replace it to the LCD Projection TV. Make sure that the Air
plac
c
c
e
e
o the
e
LC
LC
C
C
D
D
D
Filter fits the place where it should be.
6
Replace the right front cover to the LCD Projection TV.
CAUTION;
Do not operate the LCD Projection TV with the Air
Filter removed. The dust is stuck in the LCD
Projection TV and it may degrade the clear picture
reproduction performance.
RECOMMENDATION;
We recommend avoiding dusty/smoky environments when
operating the LCD Projection TV. When using under dusty or
smoky conditions, dust may accumulate on the optical
elements inside the LCD Projection TV and the screen surface.
This condition may degrade the quality of a projected image.
When the above symptoms are noticed, contact your
authorized dealer or service station for proper cleaning.
and c a ing
Pro o jec c tion T T V. Make
Pro
Right Front Cover
e A
e
Ai
A i
ir
Air Filter Holder
Air Filter Holder
- 8 -
Pull this
part first.
Air Filter
Advertisement
Table of Contents
