Lamp Replacement - Sanyo PLV-55WR1Z Service Manual

Lcd projection tv
Hide thumbs Also See for PLV-55WR1Z:
Table of Contents

Advertisement

■ Lamp replacement

When the life of the projection lamp of this LCD Projection TV
Wh
the e
he p oject n lamp o
draws to an end, the LAMP REPLACE indicator lights orange.
If this indicator lights orange, replace the lamp with a new one
promptly.
CAUTION
Allow a LCD Projection TV to cool, for at least 45
minutes before you open the Lamp cover. The
inside of the LCD Projection TV can become very
hot.
Follow these steps to replace the lamp assembly.
1
Turn off the LCD Projection TV and disconnect the AC
plug. Allow the LCD Projection TV to cool for at least 45
minutes.
2
Remove the Left front cover of the LCD Projection TV.
a. Hold left upper side of the cover and slightly pull
forward.
b. Ho
b. Hold both sides of the cover and remove it.
o
ld
ld
b
b b
b
b
ot
ot
oth
h
h
s de
ide e s o o f th h e cover
3
Loosen 4 screws that secure the Lamp Cover with a
screwdriver and remove the Lamp Cover.
4
Loosen the 2 screws that secure the lamp with a
screwdriver and pull out the Lamp by grasping the handle.
5
Replace the Lamp with a new one and tighten the 2
screws. Make sure that the Lamp is correctly secured into
the Lamp compar tment.
replacement lamp.
6
Put the Lamp Cover back and tighten the 4 screws, and
then replace the Left front cover.
7
Connect the AC Power Cord to the LCD Projection TV and
turn on the LCD Projection TV.
8
Reset the Lamp replace counter.
See "Lamp replace counter reset" on the next page .
CAUTION;
When installing the new Lamp into the Lamp compartment,
make sure the Lamp socket is securely plugged into the com-
partment socket. Improper or loosen socket connection may
par
partmen
a
en
nt sock
prope
cause arc discharge resulting fire hazard.
di
h
l
is CD P ojec
t
t
.
Refer to ordering the
et
r o
r loos
en socket
onne
ction
i
fi
d.
This indicator lights orange
when the life of the projection
lamp draws to an end.
CAUTION
For continued safety, replace with a lamp of the
same type. Do not drop a lamp or touch a glass
bulb! The glass can shatter and may cause injury.
Pull this
part first.
Screws
the
com
may
- 13 -
Front Control
LAMP
ON-OFF
REPLACE WARNING
Left Front
Cover
Screws
Lamp Cover
Handle

Advertisement

Table of Contents
loading

This manual is also suitable for:

Plv-45wr1z

Table of Contents