Table of Contents
Advertisement
■ Mechanical disassemblies
Disassemble should be made following procedures in numerical order.
Disas
s
ssemb
shou d b made
Follow
Following steps show the basic procedures, therefore unnecessary step may be ignored.
wing s
Caution:
The parts and screws should be placed exactly the same position as the origi-
nal otherwise it may cause lose of performance and product safety.
The wiring method of the leads and ferrite cores should be returned exactly
the same state as the original otherwise it may cause lose of performance and
product safety.
Caution:
Never disassemblies the cabinet back and cabinet front unless it is absolutely necessary!
If the cabinet back is to be disassembled, readjustment of the screen and Miller are required.
1
Cabinet bottom cover removal.
1. Remove the 12 screws A (T4 x 16) and remove the Cabinet bottom cover.
2. Remove the 4 screws B (T4 x 14) and remove the Bracket(R).
3. Remove the 4 screws C (T4 x 14) and remove the Bracket(L).
A
A
A
A
A
A
e following proce ure in numeric
b
BRACKET(R)
B
CABINET BOTTOM COVER
RATING SHEET
A
A
A
A
A
A
A
A
A
B
C
C
B
B
C
C
- 16 -
b
i
Screws Expression
(Type
) mm
Diameter x Length
T type
M Type
Tapping screw
Machine screw
BRACKET(L)
Fig. 1
Advertisement
Table of Contents
