To block numbers by area code
You can also block numbers by area code. This will mean that any calls
beginning with that code, will be blocked. Follow the instructions above
from 1 to 4 and then:
5. Scroll
to Area codes, press Select or
6. On first use, you will see No area codes stored. Add code? Select Yes.
7. Add the area code (e.g. 01473) and press Save.
To add a number to the allow list
1. In idle mode, press .
2. Follow the instructions to set your PIN or enter your PIN and select
3. BT Call Guardian is highlighted, press Select or
4. Scroll
to Allow numbers and press Select or
5. Add number is highlighted, press Select or
6. Enter the telephone number you want to allow (make sure you enter the full
dialling code) and press Save.
Deleting your blocked and allowed lists
When in the Block and Allow number menu's above, you also have the choice
to delete the whole list. Remember, if you do this, all calls previously blocked
and allowed, will now come back through your BT Call Guardian settings.
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
BT Call Guardian
.
.
.
.
29
.