Table of Contents
Advertisement
Wait until status light blinks blue five times indicating that the help alert was successfully delivered to
③
the server (if the status light doesn't blink blue in 60 seconds, repeat step 2).
Verify that the help alert was received by you and designated contacts (if any).
④
Log onto myAspenta account and verify that you can view device location on the map along with last
⑤
seen date/time.
You can also view your notifications history via myAspenta web or mobile app.
⑥
It is advisable to carry out initial system test in a completely open space, with the help button facing upwards. If
the status light blinks red for more than 5 minutes, switch the device off and on and repeat above steps.
Vectu uses GPS and GSM technology to determine its location. If the device is indoors or if the GPS signal is
not strong enough, the GPS location data may not be received. In that case the device location will be based
on the cellular network signal (GSM location), this location is not accurate, but rather an approximation of
the device location. If GPS signal is not available, shaded circle around the marker on the map represents
accuracy of the location.
7
Advertisement
Table of Contents
