Table of Contents
Advertisement
When your Vectu tracker indicates low battery (status light is red), recharge your battery as defined in the previous
section titled "Getting Started".
Consider keeping Vectu constantly connected to the power source via USB cable in your vehicle for applications
that require more aggressive location updates.
FIRMWARE UPDATES
To help keep Vectu up-to-date, firmware updates happen periodically and can be performed via Bluetooth ONLY
through the myAspenta mobile app. Firmware update feature will only work with smartphones that support
Bluetooth 4.0 and are running Android 4.3/iOS 7.0 and higher. You will receive in-app notification once firmware
update is available.
Please make sure that you are using the latest myAspenta App version and follow below instructions in order to
do a firmware update.
Enable Bluetooth on your phone. Tap "More" button in the
①
Home view and select "Firmware Update". Number in the
brackets indicates that new firmware is available.
Select desired device and tap "Ready for download" to
②
download the firmware. Once completed you will see
'Ready for Install" note. Tap again on the device image to
proceed.
Enable Bluetooth on your device by double clicking the help
③
button. Tap "VectuPVT" in myAspenta app to initiate
firmware update (it might take up to one minute for the
device to appear on the list).
Once completed the device will automatically go through
④
network registration process - status light will blink red. The
status light turns off when the device enters standby mode
and is ready to use.
10
Advertisement
Table of Contents
