Mazda mx-5 2017 Owner's Manual page 413

8. To remove the rear combination lamp
unit, insert your finger from inside the
trunk and into the hole from which the
grommet was removed in Step 5, and
while holding the lamp lens (round
part) of the rear combination lamp with
your hand, press the rear combination
lamp unit until the hook detaches from
the clip.
Grommet installation
hole
Hook
Rear combination lamp unit
9. After the hook is detached, pull out
the rear combination lamp unit in the
direction of the arrow and remove it.
Clip
Hook
Grommet installation hole
Rear combination
lamp unit
Owner Maintenance
CAUTION
Carefully pull out the rear combination
lamp unit when removing it from the
body.
The wiring may become damaged
if the rear combination lamp unit is
forcefully pulled out.
10. Turn the socket and bulb assembly
counterclockwise and remove it.
11. Disconnect the bulb from the socket.
12. Install the new bulb in the reverse order
of the removal procedure.
Maintenance and Care
6–51