Philips 107P Electronic User's Manual page 91

The OSD Controls
4) Press the or
5500K for PHOTO RETOUCH, or USER PRESET.
5) Once you have highlighted GENERAL USE, IMAGE MANAGEMENT, or PHOTO RETOUCH, press the
button to confirm you selection and return to the MAIN CONTROLS window. CLOSE MAIN
CONTROLS will be highlighted.
6a) If USER PRESET is highlighted, press the
button to adjust the color red.
6b) When finished with RED, press the
to adjust the color green.
6c) When finished GREEN, press the
adjust the color blue.
6d) When all adjustments are complete, press the
MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted.
After returning to MAIN CONTROLS. . .
. . . to continue to RESET TO FACTORY SETTINGS, press the
Smart
Help
RESET TO FACTORY SETTINGS is highlighted. Next, start with step 3 under RESET
TO FACTORY SETTINGS.
. . . to exit completely, press the
file:///D|/EDFU/crt_17/edoc/english/OSD/osd_cont.htm (17 of 25) [6/25/2003 10:10:06 AM]
button to highlight 9300K for GENERAL USE, 6500K for IMAGE MANAGEMENT,
button to highlight GREEN. Next, press the
button to highlight BLUE. Next, press the
button to highlight RED. Next, press the
button to confirm your adjustments and return to the
button.
or
or button
or button to
button until