Philips 107P Electronic User's Manual page 88

The OSD Controls
After returning to MAIN CONTROLS . . .
...to continue to ROTATE IMAGE, start with step 5 under ROTATE IMAGE and follow
the directions.
Smart
...to exit completely, press the
Help
...to adjust only the PARALLELOGRAM, follow steps 1 - 4 above, then press the
ROTATE IMAGE
(Not available in all models)
ROTATE IMAGE under ADJUST SHAPE allows you to adjust one of the five preset options. These two
options are PINCUSHION and BALANCED pincushion. Note: use this feature only when the picture is not
square.
1) Press the button on the monitor. The MAIN CONTROLS window appears.
2) Press the button until ADJUST SHAPE is highlighted.
3) Press the button. The ADJUST SHAPE window appears. ADJUST SIDE CURVE should be
highlighted.
4) Press the arrow until ROTATE IMAGE is highlighted.
file:///D|/EDFU/crt_17/edoc/english/OSD/osd_cont.htm (14 of 25) [6/25/2003 10:10:06 AM]
button, and follow steps 7 - 9.
button twice.