Philips 107P Electronic User's Manual page 85

The OSD Controls
7) To adjust the balanced pincushion, press the
8) When the balanced pincushion is adjusted, press the
window. BACK TO MAIN WINDOWS will be highlighted.
9) Press the button to return to the MAIN CONTROLS window, or press the
SIDE ANGLES is highlighted.
After returning to MAIN CONTROLS . . .
...to continue to ADJUST SIDE ANGLES, start with step 5 under ADJUST SIDE
ANGLES and follow the directions.
Smart
...to exit completely, press the
Help
...to adjust only the BALANCED pincushion, follow steps 1 - 4 above, then press the
ADJUST SIDE ANGLES
ADJUST SIDE ANGLES under ADJUST SHAPE allows you to adjust two of the five preset options. These
two options are TRAPEZOID and PARALLELOGRAM. Note: use these features only when the picture is not
square.
1) Press the button on the monitor. The MAIN CONTROLS window appears.
2) Press the button until ADJUST SHAPE is highlighted.
file:///D|/EDFU/crt_17/edoc/english/OSD/osd_cont.htm (11 of 25) [6/25/2003 10:10:05 AM]
button, and follow steps 7 - 9.
or button.
button to return to the ADJUST SHAPE
button twice.
button until ADJUST