ABB ACS150 User Manual page 49

Output mode
In the Output mode, you can:
• monitor actual values of up to three group
signal at a time
• start, stop, change direction, switch between local and remote control and set the
frequency reference.
You get to the Output mode by pressing the
OUTPUT at the bottom.
The display shows the value of one group
OPERATING DATA
right. Page
be monitored in the Output mode. The table below
shows how to view them one at a time.
How to browse the monitored signals
Step Action
1. If more than one signals have been selected to be monitored (see page
52), you can browse them in the Output mode.
To browse the signals forward, press key
them backward, press key
signal. The unit is shown on the
52 tells how to select up to three signals to
repeatedly.
01 OPERATING DATA
key until the display shows text
01
repeatedly. To browse
signals, one
491
.
REM
OUTPUT FWD
Display
491
.
REM
OUTPUT FWD
05
.
REM
OUTPUT FWD
107
.
REM
OUTPUT FWD
Control panel
49
Hz
Hz
A
%