Haier CSM SERIES Instructions For Use Manual page 26

English
6. USE
Description of the functions of the refrigerator and freezer
A
Setting and controlling refrigerator temperature
To turn on the appliance turn thermostat (A) clockwise from
Set the thermostat at the required temperature between
Turning off the appliance
To turn off the appliance turn thermostat (A) anti-clockwise to
off power to the appliance unplug the power cable at the socket.
Do not tug or pull the power cable to unplug.
Controlling temperature setting
When selecting the temperature setting always consider:
We recommend that you set the refrigerator at an intermediate
period of time monitor chilling and adjust the temperature to
the most appropriate setting if required.
A correct temperature setting is of utmost importance to
conserve food.
setting the refrigerator to the right temperature prevents or at
least slows down the growth of bacteria which causes food to
spoil and go off.
down.
For this reason we recommend you maintain an
average setting of refrigerator (simply turn the
thermostat A to setting "4").
room temperature and a large quantity of food stored in the
refrigerator causes the compressor to run continuously resulting
in an excessive build-up of frost or ice on the compartment
walls. If this should happen, turn the thermostat to a lower
setting to restore normal refrigeration with a substantial saving
on electrical energy.
Advice on the preservation of foods: REFRIGERATOR
Advice on cooling foods
The natural air circulation inside the compartment creates areas
with different temperatures ideal for storing different food
products. Therefore, it is important that you arrange the food
to allow the air to circulate freely.
meats are just above the vegetables drawer. Instead the less
doors (ideal for preserving butter and cheeses to spread).
Ventilation inside the vegetables drawer is provided by a series
Advice on how to best use the refrigerator compartment:
packages, liquids and all foods which issue or which can
cylinders containing inflammable propellants such as
butane, propane pentane, etc...and put back high proof
alcohol only in upright position and in properly shut
containers. Gasses or liquids that accidentally issue from
cylinders can be recognised by reading the indications
of their content, and are sometimes marked with a flame
symbol.