Canon FAX-B155 Service Reference Manual page 69

FAX-B155 5.GUlDE TO REPLACEMENT
FIGURE 9-c
Sel yTge FIGURE 12-a
See Page
2-23
To remove the CONTACT SENSOR from the HOLDER, in- When removing the purge unit, slide the pin to the right, as
set-t a fiat bladed screw driver into location 1 (on the under shown in the diagram.
side of the CS holder). Slip the screwdriver blade between
the metal plate and the retaining clip, and press upward, as
shown in the diagram. When attaching, slide the CONTACT
SENSOR in location 2, and fit it in.
FIGURE 13-a -
se~'~~ge FIGURE 14-a
See Page
2-27
.
lEVER,HOOKlNG
When removing the COVER, HOOK bend the tabs in the Fold the CARRIAGE RIBBON CABLE ASS'Y as shown in
direction of the arrows. the illustration.
5-5