Kamoer X4 User Manual page 9

Step 9:
1 When "Auto connect" is complete, X4 pump will make a beep, the screen returns to the
main screen;
2 iPhone: Display OK, and displays the IP address
Note: If failed, power off the X4. Start again from the first step.
Step 10：
After your login, it will auto turn to the main control page.
Note: 1. You only need to set Auto Connect for once, it will save the settings and you can
login to X4 by your own wifi.
2. If you want to login by a computer, change the IP address of the software to the
same as the phone.
7