Kamoer X4 User Manual page 6

2>Auto connect
Note: Software requirements:
X4 IOS Version: 1.3 (or higher)
X4 firmware version: 1.1.1 (or higher)
Preparation：
1 Install the latest control software of X4 on the phone；
2 Phone connected to your home router；
Step 1: Take out the pump, power on, wait for X4 shows the main interface
Step 2: Press the "SET" button to enter the menu.
Step 3: Press "UP" key to select "Options" and press the "SET" key to enter the options
menu.
Step 4: Press the "UP" key to select "Auto Connect" and press the "SET" key to enter the
confirmation screen.
Step 5: Press the "UP" or "DOWN" button to select "Yes" and press the "SET" button.
Step 6: Change to your mobile phone operation
4