Kamoer X4 User Manual page 21

Calibration Interface
Pump: Optional pump1, pump2, pump3, pump4;
Running Time: time of the pump head to run calibration;
Flow :the pump head's flow rate;
Start: Start / Stop;
Get Volume: During the calibration time,the volume of liquid you get;
Save calibrate result: Save parameters;
Calibrate test
Test Volume: Enter the volume to be tested;
Test Start: Start / Stop;
Note: 1, before the calibration, empty the air inside the tube;
2, the test function can test the accuracy of the calibration;
Status Screen
19