Table of Contents
Advertisement
Auto light position (if equipped)
When the light switch is in the AUTO light
position, the taillights and headlights will
turn ON or OFF automatically depending
on the amount of light outside the vehi-
cle.
CAUTION
• Never place anything over sensor
(1) located on the instrument
panel. This will ensure better
auto-light system control.
• Don't clean the sensor using a
window cleaner. The cleaner may
leave a light film which could
interfere with sensor operation.
• If your vehicle has window tint or
other types of metallic coating on
OTA040051E
the front windshield, the Auto
light system may not work prop-
erly.
Features of your vehicle
■ Type A
■ Type B
High beam operation
To turn on the high beam headlights, push
the lever away from you. Pull it back for
low beams.
The high beam indicator will light when
the headlight high beams are switched on.
To prevent the battery from being dis-
charged, do not leave the lights on for a pro-
longed time while the engine is not running.
WARNING
Do not use high beam when there
are other vehicles. Using high beam
could obstruct the other driver's
vision.
ORBC040049
ORB040049E
4 71
Advertisement
Table of Contents
