Network Connection Problems - Philips SNU6500 User Manual

EN
20
Problem Possible cause

NETWORK CONNECTION PROBLEMS

If the Link LED on PC or other network Make sure the computer and other
the Wireless USB devices switched off.
Adapter 11g True
Turbo 108 Mbps does
not light, or if you
cannot access any
network resources
from the computer.
No access to a Service unavailable.
Windows or Net-
Ware service on the
network.
If your wireless Base Station / Access
adapter cannot Point is switched off.
communicate with a
computer in the
network when Range too long
configured for (weak radio signal).
Infrastructure mode.
Wrong settings.
Network speed USB 1.1 port used
does not in stead of USB 2.0.
exceed 11 Mbps.
Other network
components are
unsuitable for higher
network speeds.
Solution
network devices are receiving power.
Check that you have enabled and
configured the service correctly.
If you cannot connect to a particular
server, be sure that you have access
rights and a valid ID and password.
If you cannot access the Internet, be
sure you have configured your system
for TCP/IP.
Make sure the access point that the
station is associated with is powered
on.
Reposition your Wireless Adapter.
Make sure the SSID and the network
encryption key are the same as those
used by the wireless access point.
Connect the wireless adapter to a
hi-speed USB 2.0 port for maximum
speed.
Make sure all network components
are suitable for high network speeds.