Install The Batteries; Install The Network Connection; Install The Power Connection - Philips SLM5500/05 Quick Start Manual

C
Install the digital audio connection (optional)
1. Take a coaxial audio cable (not supplied).
2. Plug one connector into the DIGITAL AUDIO port on the SLM5500.
3. Plug the other end into the DIGITAL AUDIO input on the sound system.
D

Install the network connection

Option 1 - Wireless
1. Make sure that your wireless network devices are switched on.
Option 2 - Wired
1. Take the network cable (not supplied).
2. Plug one connector into the WIRED NETWORK port on the SLM5500.
3. Plug the other connector into the network.
E

Install the power connection

1. Take the power cable (f).
2. Plug the connector of the power cable into the POWER port on the SLM5500.
3. Plug the power adapter into the power outlet.
> The stand-by light on front of the SLM5500 comes on as red.
F

Install the batteries

1. Open the battery compartment of the remote control (b1).
2. Insert the batteries (b2) correctly.
3. Close the battery compartment.
3
Audio
TM
WiFi
2
3
1
Ethernet
2
3
AC
1
+
+
2
1