Advertisement

Available languages

Available languages

Please read and follow all of the instructions & safety precautions detailed below prior to using this
product. Failure to do so may result in serious personal injury and / or property damage.
Do not expose this product to heat sources (including open flame or direct sunlight)
Do not expose this product to water or liquids. If liquid enters the product, immediately unplug
the product from any connected power sources or devices.
Do not disassemble or modify the product
Avoid dropping this product (or any other heavy impact which might damage the internal
circuit)
In the unlikely event of any abnormalities (such as strange odor, overheating, leaking, color
change, etc.), discontinue use immediately.
Avoid cleaning this product using liquids or chemical substances (use dry cloth only)
Only use attachments/accessories specified by the manufacturer
Dispose of this item properly (do not dispose of it in trash receptacles and do not attempt to
incinerate it)
Do not leave this product unattended while it is in use or while it is being charged
This product is not a toy: KEEP AWAY FROM CHILDREN
Only re-charge this device using a USB port wall adapter (not included)
When not being used for prolonged periods of time please charge every 3 months to avoid
damaging the battery
The T237 is a sleek aluminum Wireless V3.0 speaker with built-in microphone, FM radio and a micro-
SD card reader. Please see below user instructions.
T237 Specifications
Battery Type: Grade A Lithium-Ion rechargeable battery
Battery Duration/Lifespan: 300 times
Capacity: 500 mAh
Power Input & Current: 5V/0.5A
Speaker Output: 3W x 1
Sensitivity: 85dB
Frequency Response: 150HZ~20KHZ
Distortion Rate: 1%
Wireless Version: 3.0
Range of Wireless Communication: within 10 meters
WARNING

Safety Precautions

T237 User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the T237 and is the answer not in the manual?

Questions and answers

Summary of Contents for Spector&Co T237

  • Page 1 When not being used for prolonged periods of time please charge every 3 months to avoid damaging the battery T237 User Manual The T237 is a sleek aluminum Wireless V3.0 speaker with built-in microphone, FM radio and a micro- SD card reader. Please see below user instructions. T237 Specifications...
  • Page 2 4. Off: push the ON/OFF button to the left to turn speaker OFF Wireless Pairing 1. Once T237 has been turned on, it is automatically in WIRELESS mode (Blue LED will flash at the bottom of the speaker base to indicate it is ready for Wireless pairing) 2.
  • Page 3 5. Press on card to eject To Charge the T237 1. Insert micro USB into the T237 & connect the USB output to a wall adapter (not included) 2. Red LED indicates the device is charging (Red LED will turn OFF once fully charged)
  • Page 4 FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 5 éviter d’endommager la batterie. MANUEL DE L’UTILISATEUR DU T237 Le T237 est un haut-parleur sans fil V3.0 en aluminium, stylisé, muni d’un microphone intégré, radio FM et lecteur de carte SD. Ci-après le mode d’emploi et les spécifications du produit.
  • Page 6 Fonctionnement du T237 1. Allumer : pousser le bouton ON/OFF vers la droite pour allumer le haut-parleur 2. Une fois le T237 allumé, il est automatiquement en mode sans fil. NOTE: les dispositifs se connecteront automatiquement avec le haut-parleur T237 3.
  • Page 7 10. Appuyer sur la carte pour la faire éjecter Chargement du T237 4. Insérer le micro USB dans le T237 et connecter la sortie USB dans un adaptateur de prise murale (non inclus) 5. La lumière LED rouge signale que le dispositif est en cours de chargement (La lumière LED rouge s’éteindra une fois le chargement terminé)
  • Page 8 Il n'existe toutefois aucune garantie que de telles interférences ne se produiront pas dans une installation particulière. Si l’équipement cause des interférences nuisibles à la réception des signaux de radio ou de télévision, ce qui se détermine en allumant et en éteignant l'appareil, on encourage l'utilisateur d'essayer de corriger ces interférences par l'un des moyens suivants : ...
  • Page 9 MANUAL DEL USUARIO DEL T237 El T237 es un parlante inalámbrico V3.0 de aluminio, estilizado, dotado de micrófono integrado, radio FM y lector de tarjeta SD. A continuación las especificaciones e instrucciones de uso del producto.
  • Page 10 2. Activar la función Bluetooth en el dispositivo electrónico. 3. Buscar la señal Bluetooth Spector T237 y aparear el dispositivo (una corta melodía se escuchará señalando que los dispositivos están apareados) Modo inalámbrico...
  • Page 11 5. Oprimir la tarjeta para eyectarla Carga del T237 1. Insertar el micro USB en el T237 y conectar la salida USB en un adaptador de tomacorriente mural (no incluido) 2. La luz LED roja señala que el dispositivo está cargando (LED roja se apagará una vez terminada la carga) DÉCLARACIÓN DE LA FCC...
  • Page 12 Aún así, no existe garantía contra dicha interferencia en instalaciones particulares. Si se producen interferencias en la recepción radial o de TV, lo que puede comprobarse al apagar y encender el aparato, el usuario podrá intentar corregir el problema mediante alguna de las medidas siguientes: ...

Table of Contents

Save PDF