Advertisement
Bluetooth
Bluetooth
Inateck MercuryBox
4. The speaker is good to go and stream beautiful music.
Notes: To re-pair a device, press and hold multifunction button (Button D) for
3-4 seconds until Bluetooth indicator blinks blue light.
How to answer a call on the speaker
Press multifunction button (Button D) to answer a call, press it again to end a
call. Your phone is still able to answer a call directly.
How to use AUX mode
1. Plug the included 3.5mm audio cable from the audio device into the AUX
input on the side of the speaker, the connection is complete when
multifunction button (Button D) indicates solid blue light.
2. Play music.
Notes:
• Due to AUX s higher priority, Bluetooth will disconnect when plugging
audio cable to AUX input.
• Have a better experience to answer a call via AUX connection.
• Press the Play/Pause button will mute the speaker instead of pausing.
• Previous/Next song is not accessible under AUX mode.
Bluetooth
Inateck MercuryBox
Hello
3
Advertisement
