Adjusting Bass And Treble; Adjusting Bass And Treble Level; Selecting Bass Frequency - Pioneer DEH-P5500MP Operation Manual

Audio Adjustments
2 Press AUDIO to select the band for ad-
justment from among low, mid and high.
Press AUDIO repeatedly to switch between
the following functions:
LowMidHighB (bass adjustment)T
(treble adjustment)
# If EQ EX function has been selected and only
when EQ EX is turned on and CUSTOM is se
lected as the equalizer curve, you can switch to B
and T.
3 Press c or d to select the desired fre-
quency.
Press c or d until the desired frequency ap
pears in the display.
Low: 4080100160 (Hz)
Mid: 2005001k2k (Hz)
High: 3k8k10k12k (Hz)
4 Press a or b to select the desired Q fac-
tor.
Press a or b until the desired Q factor ap
pears in the display.
2N1N1W2W
Note
If you make adjustments, CUSTOM curve is up
dated.

Adjusting bass and treble

You can adjust bass and treble settings.
! If EQ EX function has been selected and
only when EQ EX is turned on and
CUSTOM is selected as the equalizer
curve, you can adjust bass and treble set
tings.
! If SFEQ has been set to FRT1, bass adjust
ment affects only the rear output: front out
put cannot be adjusted.
HHHHHHHHHHHHHH
! If SFEQ has been set to FRT1 or FRT2, tre
ble adjustment affects only the front out
put: rear output cannot be adjusted.

Adjusting bass and treble level

You can adjust the bass and treble level.
1 Press AUDIO to select B.
Press AUDIO until B appears in the display.
# If the treble level has been previously ad
justed, T will be displayed.
2 Press c or d to select bass or treble.
Press c and B is displayed. Press d and T is
displayed.
3 Press a or b to adjust the level.
Each press of a or b increases or decreases
the selected bass or treble level. +6  6 is dis
played as the level is increased or decreased.

Selecting bass frequency

You can select the bass frequency for level ad
justment.
1 Press AUDIO and hold until frequency
and the Q factor (e.g., F- 80:Q1W) appears
in the display.
2 Press AUDIO to select B.
Press AUDIO until B appears in the display.
3 Press c or d to select the desired fre-
quency.
Press c or d until the desired frequency ap
pears in the display.
4063100160 (Hz)
Section
08
35
En