Download
Share
Print this page
AGFEO AC14 Operating Manual
  1. Manuals
  2. Brands
  3. AGFEO Manuals
  4. PBX
  5. AC 14 analog
  6. Operating manual
AGFEO AC14 Operating Manual

AGFEO AC14 Operating Manual

Isdn pbx
Hide thumbs Also See for AC14:

Advertisement

Quick Links

Download this manual
ISDN PBX
Operating Manual
AC 14
communication
with
a system

Advertisement

loading
Need help?

Need help?

Do you have a question about the AC14 and is the answer not in the manual?

Questions and answers

Related Manuals for AGFEO AC14

Summary of Contents for AGFEO AC14

  • Page 1 ISDN PBX Operating Manual AC 14 communication with a system...
  • Page 2 I - 2 Introduction...
  • Page 3 Table of Contents Introduction - The new kind of operation - CTI - Computer-aided telephoning - Safety instructions - Pictograms and keys - Important information for using analog terminals - The LEDs of the AC 14 Set up - Scope of delivery - Connection for external music on hold - Assembly of the telecommunications system - Connecting a printer...
  • Page 4 Safety Instructions The telecommunications system is designed for ecommunications network. connection to an ISDN base connection (DSS 1 – Any other use of the telecommunications system is multiple connection). contrary to the intended purpose and thus prohib- You can connect all analog terminals to the analog ited.
  • Page 5 Microsoft Telephony Interface Microsoft the ISDN hardware manufacturer – in this case operating system TSPI AGFEO – is necessary to connect this interface to Telephony Service Provider for AGFEO AGFEO TSP the AGFEO telecommunications system. The TSP is a telecommunications systems driver which you have to install on your PC.
  • Page 6 Pictograms and Keys Operation of every function of the comprehensibly by pictograms. telecommunications system is explained clearly and Pictograms ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢ Acoustic call signal (tone call) Make call ª Lift handset Replace handset Enter phone numbers, code Conference ® numbers (PIN) Room monitoring by telephone Tones audible in the handset, e.g.
  • Page 7 Set up Scope of delivery ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢ - 1 ISDN telecommunications system - 1 PC connecting cable - 2 plugs and screws - 1 230 V power pack - 2 screw terminals 4-pole - 1 operating manual - 1 ISDN connecting cable - 1 CD ROM TK-Soft with the programs: TK-Set, TK-LCR, TK-Bill and TK-Phone Connection...
  • Page 8 230 V mains power supply ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢ The telecommunication system does not work Only use the power pack model no.: TST when the 230 V mains voltage fails. 53328 provided. Connectable terminals ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢ (DTMF) and have a flash, * and # key. The You can connect four analog terminals to the telecommunications system.
  • Page 9 Wall mounting ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢ - Mark two vertical drill holes 125 mm apart on - When marking the drill holes, make sure that the wall. there are no concealed lines at these points (gas, water pipes, electric cables or similar). - When marking the drill holes, make sure that there are no concealed lines at these points (gas, - Drill the two holes.
  • Page 10 Connecting terminals to separate TAE sockets ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢ If you want to connect your terminals to separate TAE sockets, you will find the connection panel for the plug-in terminals underneath the blue cover. Unplug the power pack from the 230 V mains Terminals 13 Terminals 11 socket before removing the cover from and...
  • Page 11 PC/printer interface ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢ The PC/printer interface of the telecommunications The printer must be kept switched on and system is a serial RS 232C interface. Here you can connected to the telecommunications system to connect: print the individual costs of the internal subscribers. The telecommunications system stores 2000 - a PC, for configuring the telecommunications system, for call data evaluation and computer-...
  • Page 12 S - 6 Set up...
  • Page 13 Telephoning With your telecommunications system you can make free calls between the connected terminals and external calls to any external subscribers. Telephoning externally Telephoning internally For an external call, the telecommunications system You can reach the internal subscribers of your seizes one of the two B-channels (lines) of the ISDN telecommunications system with the internal phone access.
  • Page 14 as the handset is lifted. Internal calls and * A further variation of the external seizure can only be set with the PC configurator. With the procedures are not possible. It is suitable for “External seizure spontaneous”, the tele- terminals which only operate external connections, communications system seizes a B-channel as soon e.g.

  • Page 15: Answering Calls

    Notes ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢ External authorisation (Authorisation) - DTMF post-dialling is possible for all existingl If you hear the error tone instead of the external di- connections, even in a refer back call, during bro- alling tone when seizing an external line, your tel- kerage and during a three-party conference.
  • Page 16 Reject external knocking ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢ * A B W t You are holding a con- Refer back, Reject the knocking Continue speaking versation and hear the call is held call external knocking tones Notes ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢ Both parties hear the knocking tone. You hear the before you can speak to the knocking party error tone when picking up a knocking call (Replace handset or hold the first call with refer...
  • Page 17 External transfer ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢ Holding 1st Refer back, 1st external Seize line Enter external Hold 2nd external external call is held phone no. conversation conversation * U E B ª Refer back, 2nd external Transfer external call Replace call is held handset Notes ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢...
  • Page 18 Knocking prevention If you do not want internal or external subscribers telephone. As-delivered state: knocking to knock, activate the knocking prevention for your prevention off. h * A N K ª Lift Knocking Selection Acknowledge- Replace handset handset prevention ment tone Automatic dialling - Connect without dialling You can switch on the “Automatic Dialling”...

  • Page 19: Busy On Busy

    Busy on Busy A caller receives no busy tone as long as one of the He then knows that you are in but are telephoning two B-channels of your ISDN access is free. You at the moment. hear the knocking tone during the current conver- "Busy on Busy"...
  • Page 20 Remote control (switch box) Some functions of the telecommunications system Operating steps for remote control: - call the switch box of your telecommunications can be controlled remotely by making a telephone system with the multiple subscriber number call en route. (MSN) of the switch box.
  • Page 21 Follow me (Diversion from) You can divert all calls for other telephones which You can still telephone normally with the diverted may not be manned to your own telephone. telephone. On lifting the handset, the special dial- ling tone reminds you that the follow me function is activated.
  • Page 22 Conference In a conference you telephone with two parties at - hold a three-party conference with an external the same time. Everyone hears what everyone else subscriber or an internal subscriber or is saying. - hold a three-party conference with two external subscribers.
  • Page 23 Least Cost Routing (LCR) Cost optimised telephoning You can program the integrated Least Cost Router front of its dialled external phone number and di- on your PC with the TK-LCR (part of TK-Soft). alled. You dial in the usual way. If the provider can- You can define which network provider is the not offer a free line after a set number of attempts, cheapest for your needs for eight local code areas...
  • Page 24 Parking an external call There are two ways of parking an external call: - you want to continue the conversation from - Parking in the telephone system. The line (B- another telephone in the telephone system channel) remains busy during parking. Every internal subscriber can pick up (unpark) the - Parking (replugging on the bus) in the ISDN ex- external call.
  • Page 25 Recovering (unparking) an external call ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢ * I A U Enter the index (0 to 9) for connection ID Lift handset ISDN unpark Index ID Hold external conversation Notes ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢ If you hear the error tone when parking an external For ISDN terminals at the external multi-equipment call, an external call is already parked under the en- access in which a two-digit connection ID needs to...

  • Page 26: Room Monitoring

    Room monitoring Every analog telephone in the telecommunications dialling the telecommunications system switch box system can be used for acoustic monitoring of the with the multiple subscriber number (MSN) specially room where it is located. For baby sitting for exam- assigned to the switch box.
  • Page 27 Refer back / Brokerage You can interrupt your telephone conversation and back to the first call. make a refer back call to a second subscriber. A held external caller hears a melody if "Music on Your first call is placed on hold. Then you switch Hold"...
  • Page 28 Callback (Knocking) The subscriber you want to reach is telephoning or internal knocking tone whilst speaking. If he hangs does not answer. To avoid having to call back again up, he will receive the call immediately. and again, you can activate a callback. You then Callback on busy from an external subscriber is get a callback as soon as he hangs up or ends a only possible if your network provider supports the...

  • Page 29: Do Not Disturb

    Do not disturb You do not want to be disturbed by calls and cial dialling tone reminds you that the tone call is switch off the tone call on your phone. You can still switched off. make calls as usual. On lifting the handset, the spe- As-delivered state: Do not disturb off Off (do not disturb off) h * R U H...
  • Page 30 Adenauer In addition to external call numbers you can also save * procedures in the phonebook. You can AGFEO then also use all the procedures even on telephones which do not support * and # . BERG Bergmann...
  • Page 31 Phonebook - Saving / cancelling phone numbers ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢ ª *PRO (system PIN) Start programming mode: h * T E L q ª nter Cancel Lift Phonebook Selection Enter short dialling in- Enter external Ackn. Replace handset dex 000 to 199 under phone number tone handset...
  • Page 32 Transmitting your phone number Your telecommunications system offers you the - Transmitting the phone number of the caller possibility of suppressing transmission of your to the called party (CLIP) phone number (MSN) to your partner. Your phone number (MSN) is transmitted to the external ISDN subscriber whom you call.
  • Page 33 Diversion – diverting calls to another telephone Diversion via the telecommunications system: fixed multiple subscriber number to another exter- The telecommunications system diverts all calls for nal destination which you specify. The B-channels a fixed internal phone number to another specified (lines) of the telecommunications system stay free.
  • Page 34 Deactivating a diversion (switching off) ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢ Internal phone h * D E A ª number Lift Deactivate Selection Wait for ackn. tone Replace Enter internal phone handset (switch off) Internal (max. 1 minute) handset number or MSN which phone you want to deactivate number or Activating a diversion (switching on) ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢...
  • Page 35 Connection costs Formatting printout - You can print out the con- Cost menu – Overview: nection data via a serial printer at the PC/printer in- Your telecommunications system can record the terface. You can set the formats for the printout of costs of calls if your network operator offers the the selected external phone numbers: ISDN feature “Transfer connection costs at the end...
  • Page 36 Entering /cancelling PIN for the cost menu ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢ ª *KOS Start cost menu: (cost PIN) h * P I N ª Enter Cancel Enter 4-digit Ackn. tone Replace Lift Selection handset handset ª *END Continue cost menu or exit cost menu: E N D Entering / cancelling factor ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢...
  • Page 37 Setting the printing format ª *KOS (cost PIN) Start cost menu: uration of connection h * D R U ª Short (24 characters/line) tandard (80 characters/line) Lift Printing format Selection Ackn. tone Replace handset handset ª *END Continue cost menu or exit cost menu: E N D Formatting the printout ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢...
  • Page 38 Printing / resetting total costs ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢ ª *KOS (cost PIN) Start cost menu: System (ISDN connection) nternal phone number h * S U M ª Print ata records Cancel 0- connection Lift Total costs Selection Selection Ackn. tone Replace handset handset ª...
  • Page 39 If the automatic-start function is deactivated on The Installation Software starts automatically. your system, please do as follow: - Select out of the CD menu "AGFEO TK-Soft for 1. Select /doubleclick) the symbol "My Computer" AS ISDN systems". on your desktop.
  • Page 40 Remote configuration – Remote Service Your dealer can program your telecommunications You also decide when and what can be pro- system with the remote configuration to suit your grammed by releases. For example, whether the requirements. Without visiting you at home simply phonebook numbers can be read and written.
  • Page 41 Programming the telecommunications system with a telephone Notes on programming with a telephone ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢ Programming with a telephone always involves the theAckn owledgement tone if your entry is valid or steps: the error tone (busy tone) if your entry is invalid. - Start the programming mode, Recommendation: Use a telephone with DTMF dial- - Input...
  • Page 42 Restoring old settings ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢ You can try out settings in the programming mode. beforehand. The programming mode is then exited Settings are not saved until you exit the program- automatically. ming mode. You can restore the settings last saved h * E S C ª...
  • Page 43 Saving multiple subscriber numbers work code after the following * procedure. Save every multiple subscriber number (MSN) which your network provider has assigned for your ISDN When you select “Fast”, you save the MSN’s and at multi-equipment access in your telecommunications the same time the terminal on which you have ex- system.
  • Page 44 Day service ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢ ª *PRO (system PIN) Start programming mode: Iz # h * T A G Mz # q ª nter Delete Lift Day service Selection MSN ID Enter MSN for Internal Internal phone Ackn. Replace handset which day no.
  • Page 45 Ringing cycles before forwarding ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢ ª *PRO (system PIN) Start programming mode: h * Z Y K E q ª Lift Cycles (number of Input ID Number of MSN ID Enter MSN for which Ackn. tone Replace handset rings) rings (2 to forwarding is defined handset ª...
  • Page 46 Programming access to the ISDN network You define which multiple subscriber number(s) of Free – these MSN’s can be selected for external sei- the telecommunications system every internal sub- zure by the internal subscriber. On the telephone by entering *MSN and the MSN. This is only scriber can use to set up an external connection.
  • Page 47 Defining authorisation Normally every subscriber can telephone all over - none (only answer incoming calls, semi- the world. restricted) However, you can define how far every single As-delivered state: non-restricted for all phone may call: subscribers - non-restricted - domestic Irrespective of the authorisation, you can define - regional numbers table (the regional numbers that every subscriber cannot dial certain phone...
  • Page 48 Programming regional numbers (free range) You have defined how far a telephone may call un- regional authorisation can dial numbers beginning der “Authorisation”. If you have set “Table regional with 022 in addition to making local calls: numbers” there, you can program up to 10 codes - He can dial e.g.: 0221, 0228, 02241, 0228.
  • Page 49 Assigning the barred numbers ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢ ª *PRO (system PIN) Start programming mode: h * Z U W ª Lift Assign barred Selection Enter internal ID Acknowledge- Replace handset handset numbers and internal ment tone phone number ª *END Continue programming or exit programming mode: Entering terminal types Settings are available dependent on the connected generally assigned where it is to be signalled ac-...
  • Page 50 Programming short commands You can also combine several functions in one short You can program a function which you want to command. use frequently as a short command. Example: Print/reset total costs for an internal sub- Two short commands which you can select with *0 or *1 on every telephone are available in scriber.
  • Page 51 Setting list of callers The telecommunications systems saves external As-delivered state: Off – no list calls which no internal subscriber has answered in a list (call list). You can display and print the list with The call list contains the following information: the “TK-Phone”...
  • Page 52 Brokerage – Setting the variant In brokerage you switch back and forth between Difference when brokering with two external sub- two parties. One subscriber is held whilst you are scribers: speaking to the other one and cannot hear what Brokerage in the telecommunications system – you are saying.
  • Page 53 Programming Music on Hold Define whether the held caller is to hear music on dio devices (CD player or cassette recorder) con- hold (MoH) when you make a refer back call or for- nected to the telecommunications system. ward a call. (Connection of an external music source, see Instal- lation) You will hear 8 melodies in succession when you...
  • Page 54 Protecting the programming mode and switch box against unauthorised access You can prevent unauthorised access to the pro- You can enter your own new PIN for better secu- gramming mode with a system PIN (Personal Iden- rity. tity Number). You can prevent unauthorised access to the switch The standard PIN or the new system PIN must be box by a box PIN.
  • Page 55 Programming the box PIN (switch box PIN) ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢ ª *PRO (system PIN) Start programming mode: h * B O X ª nter Delete Lift Selection Enter PIN ID and 4- Acknowledge- Replace handset digit switch box PIN ment tone handset ª...
  • Page 56 Loading new firmware You can update your AGFEO ISDN telecommunica- printer interface of the telecommunications system. tions system to the latest firmware state without manipulating the telecommunications system. You Your dealer can also load the new firmware in your can load the new firmware with a PC at the PC/ telecommunications system remotely by ISDN.
  • Page 57 Glossary Services Incoming external connection A service identification (ID) (e.g. telephony, fax) is Connection to a terminal of the telecommunica- transmitted in ISDN when an ISDN subscriber is tions system set up by an external subscriber with called. The caller is only connected if the called ter- the phone number of the telecommunications minal has the same service ID.
  • Page 58 N. B.! You can only use the ISDN features of your - Check that the connections of the terminals and AGFEO ISDN telecommunications system if your the telecommunications system are correctly network operator provides these features. plugged in.
  • Page 59 Behaviour in the event of faults Fault Possible causes Remedy Programming of Reset the telecommunications system telecommunications system unclear Reset the telecommunications system to the as-delivered state and reprogram No dialling tone on Power failure Check mains connection, fuses lifting the handset Defective terminal Check terminal at another connection Defective installation...
  • Page 60 Resetting the telecommunications system ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢ You can return the programming of the telecom- Attention! The following are deleted when the munications system to a defined condition by reset- telecommunications system is reset: ting. This may be necessary when unclear settings - all existing internal and external connections are to be reset or the telecommunications system is - remote configuration...
  • Page 61 Tones Dialling tone - internal {{||{{||{{||||||||||||{{||{{||{{||||||||||||{{||{{||{{||||||||||||{{||{{||{{|||||||||||| signals that you can dial after lifting the handset - external {{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{{ continuous tone which you hear when you have seized a line after dialling “0” Ringing tone {{{{||||||||||||||||||{{{{||||||||||||||||||{{{{||||||||||||||||||{{{{|||||||||||||||||| . . . - internal The internal subscriber is called {{{{||||||||||||||||{{{{||||||||||||||||{{{{||||||||||||||||{{{{||||||||||||||||{{{{|||| .

  • Page 62: Technical Data

    Technical data Housing dimensions 15.4 x 21.5 x 4.6 (width x height x depth) in cm Weight 980 g including power pack Ambient temperature - operation/storage 5 °C to 40 °C/-25 °C to +70 °C Humidity max. 70% (no condensation) Main connection 230 VAC, +10%/-10%, 50 Hz - power consumption at...
  • Page 63 Index Acknowledgement tone A - 5 Data transmission E - 4 Analog terminals E - 4, I - 2 Day service Answering calls B - 3 programming P - 5 Answering machine switching on B - 11 Picking up a call B - 9 Defining ringing assignment P - 5...
  • Page 64 Minimum PC requirements P - 1 Modem E - 4, P - 11 MSN (Multiple Subscriber Number) A - 1 Hash key E - 4 Multi-equipment access I - 2 Having a caller identified B - 7 Multiple subscriber numbers (MSN) quick entry I - 3 save...
  • Page 65 PRO (start programming mode) P - 3 entering P - 3, P - 16 Programming programming P - 16 with a PC P - 1 with a telephone P - 3 Programming mode TAPI E - 5 exit P - 4 Tariff unit B - 23 start...
  • Page 66 We are grateful for any hints at errors in this documentation. You can only use the numerous ISDN features of your AGFEO ISDN telecommunications system if your network operator offers them. Technical hotline ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢...
  • Page 67 Key words K - 5...
  • Page 68 Telecommunications Equipment 73/23/EWG Low voltage equipment 89/336/EWG Electromagnetic compatibility Your telephone carries the CE mark of approval. Ident. No. 535 257 AGFEO GmbH & Co. KG Subject to modifications. Gaswerkstr. 8 Printed in Germany D-33647 Bielefeld 0016 Internet: http://www.agfeo.de Der Umwelt zuliebe - 100% Altpapier...