Makita 6833 Instruction Manual page 8

Reversing switch action
This tool has a reversing switch to change
the direction of rotation. Press the upper
side (FWD side) of the switch for clockwise
rotation or the lower side (REV side) of the
switch for counterclockwise rotation.
CAUTION:
switch
Always check the direction of rotation before operation
*Use the reversing switch only after the tool comes to a complete stop. Changing the
direction of rotation before the tool stops may damage the tool.
Driving operation
Switch on the tool by pressing the trigger
and at the same time pushing the lock but-
ton. Hold the tool squarely against the
workpiece and apply forward pressure to
the tool. The screw will be automatically
carried to the driving position and driven
into the workpiece.
IMPORTANT:
Do not fire the tool without screws. This will damage the workpiece.
If the feeder box becomes sluggish in operation, spray car wax (spray type wax) on its
sliding surfaces. Never lubricate it.
8