Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Protos Manuals
  4. Toy
  5. 380
  6. Instruction manual

Protos 380 Instruction Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Protos 380- Instructions Manual
Release 1.0
Always check on www.msheli.com for a more recent version of this manual
Main rotor diameter.................
Tail rotor diameter..................
Length without main blades.......
Length with main blades...........
Overall height........................
Tail rotor-Main rotor ratio..........
Main pulley............................
Autorotation pulley..................
Tail pulley.............................
1
864mm (380mm blades)
181mm (67mm tail blades)
800mm
1003mm (380mm blades)
235mm
4,27
120T
94T
22T

Advertisement

loading

Related Manuals for Protos 380

Summary of Contents for Protos 380

  • Page 1 Protos 380- Instructions Manual Main rotor diameter....864mm (380mm blades) Tail rotor diameter....181mm (67mm tail blades) Length without main blades..800mm Length with main blades... 1003mm (380mm blades) Overall height......235mm Tail rotor-Main rotor ratio..4,27 Main pulley......120T Autorotation pulley....
  • Page 2 Index Pages Content safety rules tools required for assembly R/C equipment required to complete how to read this manual motor pinion teeth choice main frame assembly 8-30 31-40 head assembly 41-55 tail assembly ESC, BEC 57 - 61 canopy installation battery installation Brain installation Alu main blade holder set (optional)
  • Page 3 Always follow these rules for safety Operate the helicopter in open areas with no people nearby. Do NOT operate the helicopter in the following places and situations (or else you risk severe accidents): -in places where children gather or people pass through -in residential areas and parks -indoors and in limited space -in windy weather or when there is rain, snow, fog or other precipitation...

  • Page 4: Tools Required For Assembly

    Tools required for assembly Hexagon screw drivers : Thrust bearing grease 1,5mm 2,0mm two 2,5mm (spindle) where indicated use Thread lock MEDIUM Slow curing EPOXY...
  • Page 5 Tools required for assembly Battery pack: Swashplate servos supported: LiPo 6s 1800mAh all micro servos (qnty. 3) Trasmitter / Receiver: Satellites: Spektrum : DSM 2 - DSM X Tail servo supported: Futaba : S-Bus - S-Bus 2 HOTT SumD all micro and mini servos (qnty. 1) MPX Srxl - Hudi Standard receiver: all ESC :...
  • Page 6 How to read this manual Box and bag where you can find washers, bearings, screws and parts Apply a thin layer of threadlock on the external part of the ball bearing Pay attention to the instruction step behind this icon 24mm 12mm MSH spare part code...
  • Page 7 Motor pinion teeth choice Sport Hard 3D Hard 3D Sport 1360 Kv 890 Kv ø 3,5mm ø 5mm...
  • Page 8 Hex screw M2x4 Washer 2,1x5,5x1 Hex screw M3x6 ART. MSH41141 ART. MSH41144 ART. MSH41130 No bearing Guide pulley motor Protos 380 ART. MSH41184 Motor mount Protos 380 ART. MSH41183 Ball bearing Guide pulley support Protos 380 BB 3,5x9x4 - Front side - ART.
  • Page 9 Bag 1 + Bag 13 where I can find the parts Hex screw M2x4 ART. MSH41141 Washer 2,1x5,5x1 ART. MSH41144 Guide pulley motor Protos 380 ART. MSH41184 Guide pulley support Protos 380 - Front side - ART. MSH41185 Ball bearing BB 3,5x9x4 ART.
  • Page 10 Instructions Manual where I can find the parts Hex screw M3x6 ART. MSH41130 NOT INCLUDED...
  • Page 11 Instructions Manual Bag 1 where I can find the parts Pinion Hex grub screw M3x3 ART. MSH41189 ART. MSH41133 Tighten hard and make sure the grub screw engages in the recess when tightening No Gap...
  • Page 12 Instructions Manual Bag 1 where I can find the parts (optional) Pinion ø5 22T ART. MSH41192 Pinion ø5 24T ART. MSH41193 Pinion ø5 25T ART. MSH41194 Hex grub screw M3x3 ART. MSH41133 0,5mm Gap Tighten hard and make sure the grub screw engages in the recess when tightening...
  • Page 13 Instructions Manual Bag 1 + Bag 13 where I can find the parts Do not fully tighten yet M2,5x10 ART. MSH51143 Ball bearing Washer 6x12x4 2,6x6,5x1,5 ART. MSH41074 ART. MSH41217 ART. MSH41154 PRE-ASSEMBLED Frame central plate ART. MSH41143 M2,5 Nut ART.
  • Page 14 Instructions Manual where I can find the parts Washer 2,1x5,5x1 MSH41144 Hex screw M2x4 ART. MSH41141 Guide pulley arm - Up - Guide pulley Ball bearing 4x7x2,5 Guide pulley bushing ART. MSH41070 Guide pulley arm - Down - PRE-ASSEMBLED Belt tensioner ART.
  • Page 15 Instructions Manual Bag 1 where I can find the parts M2,5x5 ART. MSH41123...
  • Page 16 Instructions Manual where I can find the parts Ball bearing 10x15x4 Oneway hub Oneway hub Main pulley ART. MSH41146 Hex screw M2x4 ART. MSH41141 Autorotation pulley ART. MSH41147 PRE-ASSEMBLED Main pulley assembly ART. MSH41145 Oneway shaft...
  • Page 17 Instructions Manual Bag 2 where I can find the parts This side up Main shaft hollow Protos 380 ART.MSH41148 M2,5x16 ART. MSH51145 M2,5 Nut ART. MSH51137...
  • Page 18 Instructions Manual Bag 2 where I can find the parts Front belt ART.MSH41149...
  • Page 19 Instructions Manual Bag 2 where I can find the parts...
  • Page 20 Instructions Manual Bag 2 where I can find the parts Tail belt ART.MSH41150...
  • Page 21 Instructions Manual Bag 2 + Bag 3 where I can find the parts Carbon main frame Protos 380 ART. MSH41151 Hex screw M2x6 ART. MSH41122 Washer 2,1x5,5x1 ART. MSH41144...
  • Page 22 Instructions Manual Bag 2 + Bag 3 where I can find the parts Hex screw M2x6 ART. MSH41122 Washer 2,1x5,5x1 ART. MSH41144 Carbon main frame Protos 380 ART. MSH41151...
  • Page 23 Instructions Manual Bag 2 + Bag 4 where I can find the parts Lower plate Protos 380 MSH41152 Hex screw M2X8 ART. MSH41128 (optional) Landing gear Black Landing gear White ART. MSH41011 ART. MSH41214 Landing gear Yellow ART. MSH51309...
  • Page 24 Instructions Manual Bag 2 where I can find the parts Hex screw M2x6 ART. MSH41122...
  • Page 25 Instructions Manual Bag 4 + Bag 5 where I can find the parts Ball bearing 6x12x4 ART. MSH41074 ART. MSH41154 Servo frame Protos 380 ART. MSH41154...
  • Page 26 Instructions Manual Bag 5 where I can find the parts Servo frame Protos 380 ART. MSH41154 Hex screw M2x6 ART. MSH41122 ART. MSH41154...
  • Page 27 Instructions Manual Bag 5 where I can find the parts Do not fully thighten yet Hex screw M2x6 ART. MSH41122 ART. MSH41154 Washer 2,1x5,5x1 ART. MSH41144 ART. MSH41154...
  • Page 28 Instructions Manual Bag 6 where I can find the parts 15 mm Ball M2x4.8 ART. MSH41009 NOT INCLUDED M2 Nut ART. MSH41119 NOT INCLUDED...
  • Page 29 Instructions Manual Bag 6 where I can find the parts Hex screw M2,5X8 ART. MSH41131 Fully tighten...
  • Page 30 Instructions Manual Bag 7 where I can find the parts -Pull up main shaft -Push down shaft lock -Fully tighten M2x6 Main shaft lock ART. MSH41122 ART. MSH41005...
  • Page 31 Instructions Manual Bag 13 where I can find the parts M2x10 ART. MSH41121 ART. MSH41020 Ball bearing 2x5x2,5 ART. MSH41066 ART. MSH41020 PRE-ASSEMBLED Swashplate ART. MSH41020 Ball M2x2.8 ART. MSH41010 ART. MSH41020...
  • Page 32 Instructions Manual where I can find the parts...
  • Page 33 Instructions Manual Bag 7 where I can find the parts Anti swashplate spin MSH41156 Hex screw M2x6 ART. MSH41122 Washer 2,1x5,5x1 MSH41144...
  • Page 34 Instructions Manual Bag 7 + Bag 13 where I can find the parts Main hub Protos 380 ART. MSH41157 M2,5 Nut ART. MSH51137 Hex screw M2,5x16 ART. MSH51145...
  • Page 35 Instructions Manual Bag 7 where I can find the parts Ball bearing 2x5x2,5 ART. MSH41066 ART. MSH41098 Washout arm ART. MSH41099 ART. MSH41098 BB spacer ART. MSH41098 2x12 pin ART. MSH41098 Washout uniball arm ART. MSH41028 ART. MSH41098...
  • Page 36 Instructions Manual Bag 7 where I can find the parts Hex screw M2x10 ART. MSH41121...
  • Page 37 Instructions Manual Bag 8 where I can find the parts Step visible outside the main hub Spindle Protos 380 ART. MSH41158 Head dampers Protos 380 ART. MSH41155 Washer 7,5x9,8x0,2 ART. MSH41157...
  • Page 38 Instructions Manual Bag 8 where I can find the parts Ball bearing Apply grease on thrust bearing 5x10x4 ART. MSH 5107 Main blade holder Protos 380 ART. MSH41159 ART. MSH41211 BIGGER hole SMALLER hole Thrust Ball M2x4.8 5x10x4 ART. MSH41009 ART.
  • Page 39 Instructions Manual Bag 8 where I can find the parts Step outside the main hub Hex screw M3x8 ART. MSH51152 ART. MSH41158 Spindle spacer ART. MSH41158 Washer 5x7,5x0,2 ART. MSH41158...
  • Page 40 Instructions Manual Bag 9 where I can find the parts Uniball hand M2 ART. MSH41030 ART. MSH41161 19mm Rods set M2x35mm ART. MSH41161...
  • Page 41 I can find the parts Only MSH41506 - MSH41507 Tail clamp frame side ART. MSH41169 Hex grub screw Hex screw M2x10 M3x5 ART. MSH41121 ART. MSH51160 Do not fully tighten yet Pin antirotation frame Do not overtighten. Boom Protos 380 ART. MSH41170 ART. MSH41171...
  • Page 42 I can find the parts Tail box ART. MSH41162 Ball bearing 5x10x4 ART. MSH51071 ART. MSH41162 Tail pulley Protos 380 ART. 41164 Tail shaft Protos 380 ART. MSH41163 Tail pulley bushing Protos 380 ART. MSH41164 Tail box cover with BB Pin 1,5x8 ART.
  • Page 43 Instructions Manual Bag 9 where I can find the parts Tail guide pulley Protos 380 ART. MSH41166 Guide pulley ART. MSH41166 Ball bearing 4x7x2,5 ART. MSH51070 ART. MSH41166 Guide pulley bushing ART. MSH41166 Hex screw M2x10 ART. MSH41121 ART. MSH41166...
  • Page 44 Instructions Manual Bag 9 + Bag 10 where I can find the parts Tail pitch support ART. MSH41167 Hex screw M2x6 ART. MSH41122 ART. MSH41167 Tail pitch lever screw M2,5x5 ART. MSH41135 ART. MSH41168 Tail pitch lever ART. MSH41168 M2 Nut Tail pitch lever carbon ART.
  • Page 45 Instructions Manual Box + Bag 10 where I can find the parts Ball bearing 2x5x2 Hex screw M2x6 ART. MSH41066 ART. MSH41122 ART. MSH41167 ART. MSH41167 MSH41506 - MSH41507 MSH41508 - MSH41509 Carbon boom Evoluzione ART. MSH41200 Hex screw M2,5x16 Hex screw M2,5x25 ART.
  • Page 46 Instructions Manual where I can find the parts Check the rotation direction during the installation of the belt...
  • Page 47 Instructions Manual Bag 3 + Bag 10 where I can find the parts Pin antirotation frame ART. MSH41170 Vertical fin Protos 380 ART. MSH41172 Hex screw M2x18 ART. MSH41219...
  • Page 48 Instructions Manual Bag 2 where I can find the parts Spring fixed pin support ART. MSH41212 Spring belt tensioner ART. MSH41153 Spring mobile pin support ART. MSH41212...
  • Page 49 Instructions Manual Bag 10 where I can find the parts Pin 1,5x8 ART. MSH41173 Tail pitch plate assembly Protos 380 ART. MSH41173 Tail pitch plate assembly Protos 380 Tail plastic rod ART. MSH41173 ART. MSH41173 Tail spindle ART. MSH41174 PRE-ASSEMBLED Hex grub screw M3x3 ART.
  • Page 50 Instructions Manual Bag 11 where I can find the parts Ball bearing 4x8x3 ART. MSH41071 ART. MSH41176 Washer 4,1x6x0,2 ART. MSH41176 Thrust bearing 4x8x3,5 ART. MSH41065 ART. MSH41176 Washer Apply grease on thrust 6x8x0,3 bearing ART. MSH41176 Ball bearing Internal hole SMALLER 4x8x3 ART.
  • Page 51 Instructions Manual Bag 4 + Bag 11 where I can find the parts Hex screw M2x4 ART. MSH41141 Tail pitch bushing ART. MSH41176 VERY IMPORTANT Do not overtighten. Hex screw M2x10 ART. MSH41121 ART. MSH41176...
  • Page 52 Instructions Manual Bag 6 where I can find the parts Tail servo support ART. MSH41179 NOT INCLUDED Servo adapter ART. MSH50086 ART. MSH41179 Hex screw M2X8 ART. MSH41128 ART. MSH41179...
  • Page 53 Instructions Manual Bag 6 where I can find the parts Servo adapter ART. MSH50086 ART. MSH41179 Hex screw M2X8 ART. MSH41128 ART. MSH41179 Washer 2,1x5,5x1 ART. MSH41144 Hex screw M2x6 ART. MSH41179 ART. MSH41122 ART. MSH41179...
  • Page 54 Instructions Manual Bag 6 where I can find the parts M2 Nut ART. MSH41119 Ball M2x4.8 ART. MSH41009 NOT INCLUDED...
  • Page 55 Instructions Manual Box + Bag 12 where I can find the parts Tail control assembly ART. MSH41178...
  • Page 56 Instructions Manual Bag 4 + Bag 12 where I can find the parts Battery and ESC support Protos 380 ART. MSH41180 Hex screw M2x6 ART. MSH41122 ART. MSH41180 NOT INCLUDED...
  • Page 57 Instructions Manual Bag 12 where I can find the parts Canopy support ART. MSH41181 Hex screw M2x6 ART. MSH41122 ART. MSH41181...
  • Page 58 Instructions Manual Bag 4 + Bag 12 where I can find the parts Grub screw M3x14 ART. MSH41218 ART. MSH41182 Magnet canopy support Protos 380 ART. MSH41182...
  • Page 59 Instructions Manual Bag 4 + Bag 12 where I can find the parts Grub screw M3x14 ART. MSH41218 ART. MSH41182 Magnet canopy support Protos 380 ART. MSH41182...
  • Page 60 Instructions Manual - Tail fin alignment Fully tighten...
  • Page 61 Box + Bag 12 where I can find the parts Magnet canopy support Protos 380 Painted canopy FG ART. MSH41182 Washer 2,6x6,5x1,5 ART. MSH41217 Hex screw M2,5x10 ART. MSH51143...
  • Page 62 Bag 12 where I can find the parts Velcro loop ART. MSH41209...
  • Page 63 Instructions Manual where I can find the parts Brain 2 Mini ART. MSH51635...
  • Page 64 Instructions Manual MSH41215 Upgrade Ball bearing 5x10x4 ART. MSH 5107 ART. MSH41159 Apply grease on thrust bearing Main blade holder Protos 380 BIGGER hole ART. MSH41159 SMALLER hole Ball M2x4.8 ART. MSH41009 Thrust 5x10x4 ART. MSH51065 Main blade holder control arm ART.
  • Page 65 specifcation and design are subject to change without notice LOCTITE, UHU Plus, Spektrum, Futaba, HOTT and Multiplex are registered trademarks MSHeli s.r.l. Uboldo (VA) ITALY...