Lavalier Microphone - Sense SE-300-WT-HAND Manual

8. Handheld Microphone (Sold Separately)
The SE-300-WT-HAND transmits connected microphones via wireless signal and is typically used for
corporate presentations, houses of worship, audio/video conferencing, video, film and sound reinforce-
ment, etc.
Features
• Phase-locked Loop (PLL) synthesized tuner ensures reliable performance
• Powered by 2 x AA batteries with 12 hrs. battery life
• LCD display with channel and battery life indicator
• Advanced circuitry ensures stable signal transmission
• Extended dynamic range and smooth frequency response
• Noise mute and tone-key squelch
• Internal antenna design
Installation Tips & Guidelines
To place or replace batteries inside the SE-300-WT-HAND by taking the following steps.
Once you have re-attached the microphone head, pair the wireless frequency with the wireless receiver's
frequency. Refer to section 5 for full instructions on how to pair the frequency.
Annotations
SE-300-WT-HAND
2
3
1
Support: 866.838.5052
Loosen the microphone head
counter-clockwise.
Push both battery tray buttons
to release the battery.
Open the bottom of the microphone to access the LCD panel.
1. LCD Panel
2. Main display
3. Battery Indicator
PG 9 |
Insert 2 AA batteries.
Push the battery tray
back into the housing.
Thread the microphone
back on by twisting the
head clockwise.