Do you have a question about the DVD-5000 and is the answer not in the manual?
Questions and answers
Юрий
March 18, 2025
Как подключить видео часть. Диски видео не проигрывают я.
1 comments:
Mr. Anderson
March 18, 2025
To connect the video part of the Denon DVD-5000, use the following steps:
1. Choose the Output Type: The device supports S-Video output. 2. Connect the Cables: - Use an S-Video cable to connect the DVD player's S-Video output to the TV or external display’s S-Video input. - Ensure the Y output level is 1 Vp-p (75 ohms) and C output level is 0.286 Vp-p (for U.S. & Canada models) or 0.300 Vp-p. 3. Select the Correct Input on the TV: Switch the TV input source to match the connected port.
### Troubleshooting Video Playback Issues: 1. Check Cable Connections: Ensure the S-Video cable is properly connected. 2. Verify Disc Compatibility: The player supports NTSC DVDs, CD-DA, and Video CDs. 3. Adjust JIT Settings: If the DVD plays with issues, adjust the JIT value between 080-088. 4. Re-Initialize the Unit: If playback errors occur, follow the steps to re-initialize the player. 5. Check for Error Codes: If the unit displays an error (e.g., H02), follow troubleshooting steps like resetting or adjusting internal settings.
If the issue persists, further hardware inspection may be required.
Need help?
Do you have a question about the DVD-5000 and is the answer not in the manual?
Questions and answers
Как подключить видео часть. Диски видео не проигрывают я.
To connect the video part of the Denon DVD-5000, use the following steps:
1. Choose the Output Type: The device supports S-Video output.
2. Connect the Cables:
- Use an S-Video cable to connect the DVD player's S-Video output to the TV or external display’s S-Video input.
- Ensure the Y output level is 1 Vp-p (75 ohms) and C output level is 0.286 Vp-p (for U.S. & Canada models) or 0.300 Vp-p.
3. Select the Correct Input on the TV: Switch the TV input source to match the connected port.
### Troubleshooting Video Playback Issues:
1. Check Cable Connections: Ensure the S-Video cable is properly connected.
2. Verify Disc Compatibility: The player supports NTSC DVDs, CD-DA, and Video CDs.
3. Adjust JIT Settings: If the DVD plays with issues, adjust the JIT value between 080-088.
4. Re-Initialize the Unit: If playback errors occur, follow the steps to re-initialize the player.
5. Check for Error Codes: If the unit displays an error (e.g., H02), follow troubleshooting steps like resetting or adjusting internal settings.
If the issue persists, further hardware inspection may be required.
This answer is automatically generated