Brother PC8200 SUPER GALAXIE 2000 Service Manual page 22

DISASSEMBLING AND REASSEMBLING THE EMBROIDERY UNIT
1. Remove the screw and Y carriage cover.
2. Remove the screw, and remove the side cover from the lower side.
3. Remove the two screws and pull the main cover to the right.
4. Remove the three screws and the base cover.
Assembly Point
3. Securely fit the bottom rear part of the side cover into the base cover.
* If these parts do not securely fit together, the side cover may become loose and raisep up.
-20-