Brother PC8200 SUPER GALAXIE 2000 Service Manual page 13

20. Remove the two screws and the thread cutter unit.
21. Remove the screw and the inner rotary hook bracket.
22. Remove the presser bar clamp screw.
23. Remove the presser bar by lifting it from above, and the presser bar spring.
24. Remove the presser spring screw and the presser bar clamp.
25. Remove the presser lifting shaft by lifting it from above, and the presser lifter.
26. Pull the tension releaser plate out forward.
27. Remove the screw and the thread take-up shaft.
Disassembly Point
20. Before removing the thread cutting assembly, move the thread cutter cam so that its notch faces the front of
the sewing machine (A).
-11-