Kenmore 116.31140 Use & Care Manual page 21

Hide thumbs Also See for 116.31140:
Table of Contents

Advertisement

Available languages

Available languages

Review this table to find do-it-yourself solutions for minor performance problems. Any service
needed, other than maintenance described in this Use & Care Guide, should be performed by
a Sears or other qualified service agent.
WARNING
Disconnect electrical supply before performing
maintenance
to the vacuum
cleaner. Fail-
ure to do so could result in electrical shock or personal injury.
l
PROBLEM
Vacuum cleaner
won't
run.
Poor job of dirt
pick-up.
Vacuum cleaner
picks up moveable
rugs or pushes too
hard.
Agitator does not
turn.
Airflow
restricted
with
attachment
use;
sound changes.
I
I
Poss,. AusE
]
1. Unplugged
at wall outlet.
2. Tripped circuit breaker
or blown fuse.
3. Thermal protector
tripped.
4.
Defective
wall outlet.
1. Full or clogged
dust bag.
2. Wrong
pile height setting.
3. Worn agitator.
4. Clogged
nozzle or
bag holder.
5. Clogged
hose.
6. Hole in hose.
7. Hose not inserted fully.
8. Motor protection
system
activated.
9. Dirty filters.
10.
Clean-out
port
not closed.
1. Wrong
pile height
setting.
I.
Handle
in full
upright
position.
2. Agitator
overload
protector
tripped
3. Switch
in FLOOR
position.
1. Attachment
use restricts
air flow.
2.
New carpet
fuzz
clogged
air path.
l
OSSIBLE SOLUTION
]
1. Plug in firmly, select the
desired setting on the touch
control.
2. Reset circuit breaker or
replace fuse.
3. Allow vacuum cleaner to cool
50 minutes. (Page ]2)
4. Check with a good appliance
or lamp. Have outlet properly
serviced.
1. Change bag. (Page ]5)
2. Adjust setting. (Page ]0)
3. Replace agitator.
4. Check REMOVING
CLOGS.
Pages (]9-20)
5. Check for clogs. (Pages 19-20)
6. Replace hose.
7. Insert hose fully.
8. Check for clogs. (Pages 19-20)
9.
Clean
or change
motor
safety
filter
and exhaust
filter.
(Page
16)
10.
Close
clean-out
port.
(Page
20)
1. Adjust
setting.
(Page ]0)
1. Move handle from upright
position.
2. Press OVERLOAD PROTECTOR
RESETbutton. (Page ]3)
3. Move switch to CARPET
position.
1. Check attachments for fuzz,
lint, pet hair or other debris.
2. Check REMOVING
CLOGS
and clean hose. (Pages 19-20)
=21 =

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents