Advertisement
2-3.Adjustment legs
Adjustment legs
Adjustment legs
The diagram on the left shows the underside
of the unit.
Adjustment legs are attached in two
locations as shown in the diagram.
Adjust the length of the adjustment legs to
raise the lens side of the projector and
modify the projection angle or to fine tune
the inclination of the left and right sides.
Fixed leg
The diagram on the left shows the side of
the unit.
The adjustment legs have a threaded
structure and can be rotated to adjust the
length.
Rotate
This product can be installed with a
maximum angle of 4.5° between the unit
and the installation table.
Maximum 4.5°
* The diagram is for explanation purposes only. It does not match the actual product shape.
(4/7)
Advertisement
