Subscribe to Our Youtube Channel
Related Manuals for Skil 5865
Summary of Contents for Skil 5865
- Page 1 CIRCULAR SAW 5865 (F0155865..) ORIGINAL INSTRUCTIONS www.skilmasters.com SKIL Europe BV - Konijnenberg 60 10/15 2610Z07441 4825 BD Breda - The Netherlands...
- Page 2 5865 110 V - 50 Hz...
- Page 4 3 mm 3 mm...
- Page 5 65mm 65mm ≥ 65mm 0° ≥ 65mm 0° 90° 90°...
- Page 6 Ø 34-35 mm...
- Page 8 ACCESSORIES WWW.SkILmAStERS.COm ➞...
-
Page 9: General Safety Instructions
If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of Circular saw 5865 electric shock. 3) PERSONAL SAFEtY INtRODUCtION a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not • This tool is intended for lengthways and crossways... -
Page 10: Kickback Causes And Related Warnings
f) keep cutting tools sharp and clean. Properly a) maintain a firm grip with both hands on the saw maintained cutting tools with sharp cutting edges are less and position your arms to resist kickback forces. likely to bind and are easier to control. Position your body to either side of the blade, but g) Use the power tool, accessories and tool bits etc., not in line with the blade. -
Page 11: Before Use
! push spindle-lock button C only when tool is at a • Only use a saw table provided with a kerf guide standstill ACCESSORIES - release spindle-lock button C • SKIL can assure flawless functioning of the tool only - remove flange E when original accessories are used - open lower guard F with lever G and hold it while you • Use only accessories with an allowable speed matching mount saw blade with saw teeth and arrow printed on... -
Page 12: Application Advice
! never let the vacuum cleaner hose interfere with • Cutting large panels $ the lower guard or the cutting operation - support panel close to the cut either on floor, table or - one may also use a dust bag (SKIL accessory workbench 2610387402) ! set cutting depth so that you cut through panel ! do not use dustbag/vacuum cleaner when cutting... -
Page 13: Declaration Of Conformity
DECLARAtION OF CONFORmItY Circular saw 5865 technical data 1 • We declare under our sole responsibility that the product described under “Technical data” is in conformity with the following standards or standardization documents: EN 60745, EN 61000, EN 55014, in accordance with the provisions of the directives 2004/108/EC (until 19.04.2016), 2014/30/EU (from 20.04.2016), 2006/42/EC, 2011/65/EU • technical file at: SKIL Europe BV (PT-SEU/ENG1), 4825 BD Breda, NL 26.10.2015 NOISE/VIBRAtION • Measured in accordance with EN 60745 the sound pressure level of this tool is 96.5 dB(A) and the sound power level 107.5 dB(A) (standard deviation: 3 dB), and the vibration ✱ (triax vector sum; uncertainty K = 1.5 m/s²) ✱ when cutting wood 2.6 m/s²... - Page 14 ✎...
- Page 15 ✎...
Need help?
Do you have a question about the 5865 and is the answer not in the manual?
Questions and answers