Replacing The Power-Button Board; Procedures; Post-Requisites - Dell Inspiron 14 3000 Service Manual

Replacing the power-button
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedures

1 Slide the power-button board under the tab on the palm rest and align the screw
hole on the power-button board with the screw hole on the palm-rest assembly.
2 Replace the screw that secures the power-button board to the palm-rest
assembly.
3 Slide the power-button board cable through the slot on the palm-rest assembly.
4 Turn the palm-rest assembly over.

Post-requisites

1 Follow the procedure from step 4 to step 11 in
2 Replace the keyboard.
3 Follow the procedure from step 4 to step 6 in
4 Replace the base
5 Replace the battery.
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
"Replacing the palm
"Replacing the hard
Before
rest".
drive".
45