Yamaha MC1204 Operating Manual page 14

A Recording System
As in the sound reinforcement system shown previous­
ly, balanced microphones are plugged directly into the
channel XLR input connectors, while unbalanced elec­
Ironic instrument outputs (synthesizers, etc.) are con­
nected via a balancing transformer type direct box. In
this case, however, the last four input channels are
connected to the outputs from a 4-channel multitrack
tape recorder . Compressors are connected at the insert
jacks of the vocal mic channe ls. The ECHO 1 and 2
SEND and RETURN connectors are connected to a
high-quality stereo plate reverb unit. The FB 1 and 2
OUT connectors feed separate headphone amplifiers
providing two different headphone cue mixes for the
performers. The STEREO OUT connectors feed the
control room monitor system, and the GROUP OUT
connectors feed the 4-channel multitrack recorder .
luJ
DIRECT
I~ BOX
OX 7
SY NTH ESIZER
SPEAKER
PERFORMERS'
HEADPHONES
SPEAKER
. ·C HANNEL
MICRO PHON ES
- MULTrm AC K
L...:-=-=--"--"'-'
TAPE DECK
STER EO
PLATE
REVERB
MONITOR
MONITOR
13