Inateck BR1003 Instruction Manual page 4

Basic operation and LED indicator in TX mode
LED indicator
Blue LED flashes quickly
Blue LED flashes once every second
Solid Blue LED
White LED flashes quickly
Solid White LED
Function
Power on
Power off
Fast Pairing
mode
Connect
with all
previously
connected
devices
Operation
Press MFB around
3 seconds
Press MFB around
3 seconds
Power on the
unit, double click
the MFB
Power on the unit
( using two
c o n n e c t i o n s
simultaneously ),
short press MFB
BR1003 state
Pairing
Unconnected standby mode
Connected mode
Low voltage
Recharging
LED indicator
After blue LED flashes twice, BR1003 is
powered on.
If BR1003 paring list is empty, it enters into
pairing mode quickly with Blue LED flashing
after power on. It will go into connective
standby mode
established within 2 minutes, the Blue led
flashes every second.
If the BR1003 paring list is not empty, the
blue LED light will flash blue after powering
it on and will search and connect devices
automatically. It will show a solid blue LED
after successful connection, otherwise it will
enter into pairing mode.
White LED flashes twice
The Blue LED flashes quickly to enter pairing
mode, it will be in connective standby mode
if no connections in 2 minutes.
Blue LED flashes after power on. It will
connect all the
automatically, After successful connection,
LED indicator changes to solid blue. (It will
prioritize the latest two connected devices)
It will be in connective standby mode if no
connection is made within 2 minutes, the
Blue led flashes every second.
if no connection
connected
is
device