Table of Contents
Advertisement
aDDITIonal InfoRmaTIon
Warning indicators
When the warning indicators (see below) light up or flash, the projector will automatically shutdown:
‡
"LAMP" LED indicator is lit red and if "On/Standby" indicator flashes red.
‡
"TEMP" LED indicator is lit red and if "On/Standby" indicator flashes red. This indicates the projector
has overheated. Under normal conditions, the project can be switched back on.
‡
"TEMP" LED indicator flashes red and if "On/Standby" indicator flashes red.
Unplug the power cord from the projector, wait for 30 seconds and try again. If the warning indicator light up or
flash, please contact your nearest service center for assistance.
lED lightning messages
Message
Standby state
(Input power cord)
Power on (Warming)
Power on and Lamp
lighting
Power off (Cooling)
Quick Resume (100
secs)
Error (Lamp failure)
Error (Fan failure)
Error (Over temp.)
Standby State
(Burn in mode)
Burnin (Warming)
Burnin (Cooling)
‡
Power off:
‡
Lamp warning:
Power LED
(Red)
Steady light
Flashing
(0.5 sec off /
0.5 sec on)
Steady light
Flashing
(0.5 sec off /
0.5 sec light). Back
to red steady light
when cooling fan
turns off.
Flashing
(0.25 sec off /
0.25 sec light)
Flashing
Flashing
Flashing
Power off
Power off?
Press power key again.
Warning
lamp Warning
lamp life exceeded.
Power LED
Temp-LED
(Green or Blue)
(Red)
Flashing
Steady light
Flashing
Flashing
Flashing
Lamp-LED
(Red)
Steady light
English
51
Hide quick links:
Advertisement
Table of Contents
