Delete Answer Machine Messages; Answer Machine Settings - Philips DECT 629 User Manual

Volume adjustment
During message playback and call screening you can adjust the
loudspeaker volume by using the keys on the rear of the base:
Press to increase the loudspeaker volume.
Press to decrease the loudspeaker volume.

Delete answer machine messages

To delete an answer machine message
Press to delete while listening to a message.
A short beep confirms deletion of the message.
To delete all answer machine messages
Deletion of all messages is only possible in the idle mode and when there are no new unread
messages :
Press and hold to delete all old messages.
A long beep confirms deletion of all old messages.Then the answer machine display shows
"00" without the envelope icon.
Note : Deleted messages can not be recovered. If there is no more memory left, two bars on the
display will keep flashing and the base LCD backlight will be ON continuously.

Answer machine settings

In the answer machine setting sequence the following items can be modified one after the other
in the fixed order (all settings must be done in a row) :
Sequence 1 :To select the answer mode and the outgoing message type
The answering machine announces the outgoing message when it answers the call.There are 2
default outgoing messages :
Outgoing message 1
Outgoing message 2
The voice language of the predefined outgoing messages can be changed (see page 42).
You can also record your own outgoing message 1 and outgoing message 2 (see page 49).
Press to switch the answer machine ON.
To enter the answer machine setting mode :
Press for approx. 4 seconds, until the outgoing message icon
setting / ok
other icons except power
1. Outgoing message selection (1/2)
2. Ring delay (1 - 7)
3. Call screening (ON/OFF)
4. Remote access code
Answer & Record (when messages can be left).
Answer only (when no messages can be left)
are cleared.
Answer machine DECT 627
Volume adjustment
s e t t i n g / o k
flashes and all
47