Clock & Alarm; To Set The Date And Time; To Set The Alarm Clock - Philips DECT 629 User Manual

Date & Time
To set the date and time (of the handset and base station)
After setting, the date and time are shown in idle mode.
Press to reach the menu list.
Scroll to Clock & Alarm and press
Press to select Date & Time.
Enter the current time (HH:MM).
Enter the current date (DD/MM).
Press SELECT to confirm.
Warning : If your phone is connected to an ISDN line through an adaptor, the date & time may be
updated after each call. Please check the date & time settings in your ISDN system. Please contact your
network provider (see FAQ page 52).
Alarm
To set the alarm clock ON/OFF
By default the alarm is off.
Press to reach the menu list.
Scroll to Clock & Alarm and press
Scroll to Alarm and press
Browse through the options Off, On Once, On Daily and select
setting.
If you select On Once or On Daily :
Enter the time and press
When the alarm is set to On Once or On Daily, an alarm icon
the display headline.The alarm tone rings for 1 minute at the most. Press
to switch off the alarm and return in idle mode.
26
Clock & Alarm
Date & Time
Alarm
Alarm Tone
SELECT.
SELECT.
SELECT.
SELECT.
Clock & Alarm
the appropriate
is shown in idle mode in
STOP or any key