Before You Start; The Micro-Sim Card; The Battery - Philips Cordless Telephone Dual Band User Manual

B
E F O R E Y O U S TA R T

The micro-SIM card

To use your phone, you must insert a valid
micro-SIM card supplied by your GSM network
operator.When you switch the phone on, it may
ask for the PIN code.The PIN code is the secret
code of the micro-SIM card.
The micro-SIM card contains your subscription number and phone number. It
also contains a memory in which you can store phone numbers and messages. If
you use your micro-SIM card on another phone, you still retain the same phone
number, stored numbers, and messages.

The battery

Your phone is powered by a rechargeable battery.
Remove the battery cover
Press on the latch on the back of the phone
and lift off the battery cover.
Remove the battery (if necessary)
Lift up on the bottom of the battery and
remove it from the phone.
• After you plug in the battery, please wait a few seconds
before pressing the on/off key to switch the phone on.
• A battery only reaches its maximum capacity after being
totally discharged and recharged 2 or 3 times.
• A battery lasts longer if you allow it to fully discharge from
time to time.
• If you do not use your phone for several days, it is better
to remove the battery.
From your card, remove
2
the micro-SIM card