Table of Contents
Advertisement
INSTALLATION
2
2.1 Precautions
2.1.1 General notes
WARNING!
When you install the device, obey the conditions in the IECEx approval certificate. These
conditions include:
The special conditions for safe use.
•
The Essential Health and Safety Requirements.
•
The certificate is given on the DVD-ROM supplied with the device. You can also download the
certificate from our internet site.
DANGER!
This installation must agree with IEC 60079-14: Explosive atmospheres - Part 14: Electrical
installations design, selection and erection and IEC 61241-14: Electrical apparatus for use in the
presence of combustible dust - Part 14: Selection and installation.
2.1.2 Electrostatic discharge
DANGER!
Risk of electrostatic discharge from the blue plastic sun cover, the Drop antenna and the flange
plate protection (if the Drop antenna has this option). Make sure that all personnel and
equipment are correctly grounded.
Figure 2-1: ESD warning sticker (below the device nameplate)
Take the necessary antistatic precautions if you:
• handle,
• install or
• use
the device in potentially explosive atmospheres. Do not install in a location (near to ventilation
systems, for example) where the electrostatic charge can increase.
7
PLASTIC PARTS
WARNING:
!
POTENTIAL ELECTROSTATIC HAZARD
SEE INSTRUCTIONS
www.drexelbrook.com
DR6300 SERIES
DR6300-LM IECEx, EDO 2-13-118, Issue 1
Advertisement
Table of Contents
