TP-Link Archer MR200 Quick Installation Manual page 8

English
3. Enter the new password that you created and click
Login.
Note: For subsequent logins, use your password that you have created.
4. Select your Region and Time Zone, then click
Next.
Region:
United Kingdom
Time Zone:
(GMT) Greenwich Mean Time: Dublin, Edingburgh, London, Lisbon
5. Follow the step-by-step instructions of the
Quick Setup to complete the initial configuration.
On the Wireless Settings page, you can customize
your 2.4GHz and 5GHz wireless network names and
passwords.
Note: The router can also be used (or configured) in Wireless Router Mode for
ADSL/Cable connections. For more advanced configurations, please refer to the
User Guide on TP-LINK official website at www.tp-link.com.
Wireless Network (2.4GHz):
Enable
Wireless Network Name (SSID):
TP-LINK_XXXX
Password: XXXXXXXX
Wireless Network (5GHz): Enable
Wireless Network Name (SSID): TP-LINK_XXXX_5G
Password: XXXXXXXX
6
Next
Back Next
LED Indicators
LED Status Indication
On System initialization complete.
System initializing or firmware upgrading is in process.
Flashing
Do not disconnect or power off the router.
Power
Off Power is off.
On Internet connection is available.
Internet
Off No Internet connection.
On The router is using the 4G network.
The router is using another network other than the 4G
4G
Off
network.
At least one wireless radio band (2.4 GHz or 5 GHz) is
On
enabled.
Wireless
Off The wireless radio band is disabled.
On At least one LAN port is connected.
LAN Off No LAN port is connected.
Turns On when a WPS synchronization is established
On/Off
and automatically turns Off about 5 minutes later.
A wireless device is trying to connect to the network
WPS
Flashing
via WPS. This process may take up to 2 minutes.