Table of Contents
Advertisement
of your choice, then press
,
deselect it and press
All connection settings described below will apply to the
selected profile, which you can then rename for easier
identification.
Connection
Select connection
Allows you to select one of the data profiles you have
defined in
Settings
>
Access settings
tailed information on this subject).
In the list that appears, select the connection setting of
,
your choice and press
Bearer
Allows you to select the type of network used by the se-
lected profile when launching a connection.
or GPRS: your mobile will only use the GSM or
GSM
the GPRS network for WAP connections.
first: your mobile will first try to connect to the
GPRS
GPRS network, then to the GSM network if the GPRS
network isn't available when connecting.
Selecting this option requires you to have configured
both GSM and GPRS settings. See page 44 for details.
84
<
>
or
to select /
to confirm.
(see page 44 for de-
to confirm.
Proxy address
Allows you to specify a proxy gateway address to be
used when launching a WAP connection using the se-
,
lected profile. Press
,
choice, then press
to confirm.
0
Press and hold
to enter a dot «.»
Proxy port
Allows you to specify a proxy port number, in case the
proxy you are using requires a different port number.
,
Press
and enter the number of your choice, then
,
press
to confirm.
Security
Certificates
Select this menu and press
stalled security certificates. Select one of the items in
,
the list and press
to display its details or delete it.
Session info
Allows you to display information about the current
WAP session: security type, class, etc. Press
back one page.
Current certificate
Allows you to display the currently used security certif-
c
icate. Press
to go back one page.
and enter the address of your
,
to display the list of in-
c
to go
WAP
Advertisement
Table of Contents
