Table of Contents
Advertisement
To receive a second call, you must have:
- subscribed to this feature,
- deactivated the Call forward option for voice calls (see
page 78),
- activated the Call waiting option (see page 79).
If you receive a second call, press
•
accept the second call: the first one is put on hold,
the second one is active. If you want to toggle
between the two calls, press
calls. Each time you toggle from one call to
another, the active call is put on hold and the call
which was on hold is then activated. To introduce
the new caller into a conference press
.
select
Conference
•
reject the second call
•
end the active call, then your incoming call is
ringing.
Notes:
- If you also wish to answer the incoming call, press
(
)
; to reject it, press
-
If you have activated call forwarding 'If Busy' (see
"Call forward" page 78), you will never receive second
calls since they are always forwarded when the line is
busy.
Operator services
,
, then you can:
,
then select
Switch
,
and
.
Answer a third call
Subscription dependent
While in communication and one call being on hold,
you may receive a third call. The phone emits an alert
beep. You can either end one of the calls before being
able to answer the third one or introduce the calling
party into a conference (see below). This service is lim-
ited to two current communications (one active and
one on hold).
Conference call
Subscription dependent
You can activate the conference call by
making consecutive outgoing calls, or
Conference
create it from a multiparty call context.
You may have up to five members at the same time and
end the conference with
disconnected.
In order to make consecutive outgoing calls, first initi-
ate a normal call with the first number of the confer-
ence. When the first member is on line, initiate a
second call as described in "Make a second call" above.
When the second call is engaged, press
)
. At this point all calls are
,
and select
89
Advertisement
Table of Contents
