Cisco Catalyst 2960-L Getting Started Manual page 11

Getting Started with the Switch
Attaching the Rack-Mount Brackets to a 24-Port and 48-Port Cisco Catalyst 2960-L Switch
Use two Phillips flat-head screws to attach the long side of the bracket to each side of the switch.
Figure 6: Attaching 19-inch Brackets to a 24-Port and 48-Port Cisco Catalyst 2960-L Switch
1
2
Front-mounting position
Number-8 Phillips flat-head screws
3 Mid-mounting position
4 Rear-mounting position
Cisco Catalyst 2960-L Switch Getting Started Guide
Installing the Switch
11