Operation; Additional Hardware And Software - Chauvet pvp x3 User Manual

9. Operation

Additional
Hardware and
Software
Item
VIP Driver
LED Studio
VIP Signal Distributor
(optional)
PVP X Series Rigging Bar
(optional)
Neutrik etherCON Signal
Extension
(optional)
Neutrik powerCON Extension
(optional)
VIP Media System and one VIP
Driver
VIP Media System with ArKaos
MediaMaster Express + KN and
One VIP Driver
ArKaos MediaMaster Express +
KN
PVP X3 User Manual, Rev. 6
In addition to the panels, you will need other hardware and software to design, build, and
operate your VIP video wall system. The following table summarizes these additional
items—some are required and others are optional.
Interface between the signal source, LED Studio, and the
PVP X3 being used
Software application used to design and run the PVPs
comprising the video wall. A PC is needed
Connects between the VIP Driver and the PVPs to
distribute the source signal from the VIP Driver to the
video wall
Provides hardware needed to mount PVP X series.
Neutrik etherCON extension cable; 18 in.
Neutrik etherCON extension cable; 5 ft
Neutrik etherCON extension cable; 10 ft
Neutrik powerCON Extension, 18 in
Neutrik powerCON Extension, 5 ft
Neutrik powerCON Extension, 10 ft
Neutrik powerCON Extension, 25 ft
Neutrik powerCON Extension, 50 ft
Rack mountable, video computer system with the VIP
Driver and LED Studio software
Rack mountable, video computer system with the VIP
Driver and LED Studio software, as well as ArKaos
MediaMaster Express
Video playback software + KN control
Description
Operation
Item Code
99090575
99090576
06090926
19090363
19090364
19090365
19110372
19110373
19110374
19110375
19110376
29